What are your film sizes?

[Prosperi-Tees]

Just doing some market research. I was trying to break this poll down into how often you buy for each size but I think that would be too complicated and I cant figure out how I could make that work with a poll. Thanks guys!

[Frog]

I have to say, that I also conscientiously save and use both film and transfer paper scraps as well, so may I start with a 13x19, I often have a piece around 5 x 13 left over which also gets used at some point sooner than later. Even when only 8.5"...
"If it's long enough to feed, it's long enough to need"

and btw, though I use a lot of 8.5" x 11", I cut them from my 11" x 17".

[hoogie]

Epson 4900 here, upgraded from the 4000...with an all black system in there for 17" roll feed. running threw 4-5 100' rolls a month...like the cutter on it keeps waste down, plus gang several prints and run them all at the same time....

[Rockers]

14" roll and 17" roll

[mk162]

I used to use 13 and 17 rolls.  With CTS I no longer need film. 

[myseps]

I use 24" rolls and 44" rolls.   However Ive found that the 24" rolls are perfect for almost everything.  For big jobs you can rotate the art to make it 22"-23" tall,  and for the smaller jobs under 12" wide the art tiles up and prints twice as fast so that saves you time and money.

[Inkworks]

I run 13 x 19" and 17 x 22" but we cut and use any and all scraps down to 4" x 6" as they are perfect for padprinting films.

[Prosperi-Tees]

Cool guys keep em coming, so far my guess as to how this would go was almost right.
I haven't voted yet but it's looking like I'd be the only one running 8.5x14...

[JBLUE]

17 inch roll here.

[Zelko-4-EVA]

36" roll

[Frog]

Cool guys keep em coming, so far my guess as to how this would go was almost right.
I haven't voted yet but it's looking like I'd be the only one running 8.5x14...

I would rarely need legal size (8.5x14), but I used to need to fool my printer into thinking that's what I was running to get the full use of a letter sized film. The HP 9800 ran a huge margin at one end.

[Shanarchy]

Epson 1400
13x19 and 8.5x14
I used to also use 8.5x11, but used it very infrequently so I no longer buy it.

I would like to eventually upgrade to a printer that can use 13" rolls.

[sqslabs]

We use 8.5x11, 11x17 and 13x19 with our Epson 1400, and 17" roll with our Epson 4000.

[Prosperi-Tees]

We use 8.5x14 cause we do alot of narrow center chest center back prints that are 12" wide, although I have been ganging them on 13x19s as of late. I can't believe I never ganged images on film until recently, don't know what I was thinking.

[Frog]

We use 8.5x14 cause we do alot of narrow center chest center back prints that are 12" wide, although I have been ganging them on 13x19s as of late. I can't believe I never ganged images on film until recently, don't know what I was thinking.

That's what the 13"x19" and it's scraps are for in my shop. Perfect for my usual max width.