Author Topic: Warm water when rinsing screens... 4/10  (Read 2430 times)

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Warm water when rinsing screens... 4/10
« on: April 10, 2014, 09:20:36 AM »
Hey Everyone...

We've never used warm when rinsing out images. Always cold.
Pierre mentioned something a while back regarding warm water in
the production area... Does using warm water make rinsing images out much easier?
My guess is yes, but would like to know how many of you use warm water in this step.

Thanks.  John


Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Warm water when rinsing screens... 4/10
« Reply #1 on: April 10, 2014, 10:06:35 AM »
I feel it does but , the warm water can mess with some pressure washers & break down their internal components much quicker.

Murphy37


Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: Warm water when rinsing screens... 4/10
« Reply #2 on: April 10, 2014, 10:42:27 AM »
we have an aquarium heater in our post-exposure water tank... helps a LOT in rinsing out.  the open areas are nearly falling out as we pull the screens from the tank a minute or so after we put them in.  No problem at all with the exposed areas.

We then use cold water with the pressure washer to rinse the screen.

Offline kirkage

  • Verified/Junior
  • **
  • Posts: 82
Re: Warm water when rinsing screens... 4/10
« Reply #3 on: April 10, 2014, 11:10:48 AM »
cold water for wash out and room temp for reclaim

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Warm water when rinsing screens... 4/10
« Reply #4 on: April 10, 2014, 11:43:18 AM »
I use slightly warm water for development, but do not use a pressure washer.
That rug really tied the room together, did it not?

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: Warm water when rinsing screens... 4/10
« Reply #5 on: April 10, 2014, 11:57:04 AM »
Don't know about to develop a screen, but warm water helps in the reclaim
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Warm water when rinsing screens... 4/10
« Reply #6 on: April 10, 2014, 12:16:23 PM »
When our hot water heater crapped out several years ago we never bothered reinstalling one. I have not really noticed any difference in reclaiming or developing tho I am sure reclaiming would be a bit faster but not necessary.

"No man is an island"

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Warm water when rinsing screens... 4/10
« Reply #7 on: April 10, 2014, 01:14:58 PM »
I'd kill for a hot water pressure washer as the final stage of screen cleaning.

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Warm water when rinsing screens... 4/10
« Reply #8 on: April 10, 2014, 02:11:32 PM »
we use hot water just to develop/rinse. The pressure washer is using cold water.

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Warm water when rinsing screens... 4/10
« Reply #9 on: April 10, 2014, 04:11:01 PM »
I'd kill for a hot water pressure washer as the final stage of screen cleaning.

I used a diesel or kerosene fired one at Andy's that we got new at Cresco. Maybe they sell retired rental ones at a good price
That rug really tied the room together, did it not?

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Warm water when rinsing screens... 4/10
« Reply #10 on: April 10, 2014, 04:16:55 PM »
Didja like it?

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Warm water when rinsing screens... 4/10
« Reply #11 on: April 10, 2014, 04:57:05 PM »
Reclaiming was not as easy back then, what with xylene actually hardening emulsion and all, and no dip tanks, so yeah, very hot water helped!
When I first got there, they were running one from the water heater drain.
Then, I got the Mi-T-M from Cresco, and it kicked ass!
That rug really tied the room together, did it not?

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Warm water when rinsing screens... 4/10
« Reply #12 on: April 10, 2014, 05:13:35 PM »
Yeah I'd imagine hot water would be awesome.

Not sure about running a diesel or kerosene heater inside though...

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Warm water when rinsing screens... 4/10
« Reply #13 on: April 10, 2014, 05:54:53 PM »
Yep, I was outdoors, rain or shine, though I was mostly under a roof.

That rug really tied the room together, did it not?

Offline sben763

  • Verified/Junior
  • **
  • Posts: 83
Re: Warm water when rinsing screens... 4/10
« Reply #14 on: April 11, 2014, 08:49:33 AM »
At a automotive shop I worked at in the late 80's I ran a diesel hot water pressure inside.  I permanently mounted it and welded a pipe out the wall for the exhaust. I am thinking of doing the same thing when I put the addition on my shop.   

I am going to try warm water for developing. I seen the mention of a aquarium heater but those are expensive in larger sizes.  A livestock deicer will keep water around 90-100 degrees. Does anyone have a recommendation of what temp to keep a developing tank.