I used the 55 1200 elliptical as for tees..
1 color black, no greys, I wish I could flash but for the ADE series it said not too hot, its air dry, with epoxy...i wear a mask..
the heavy body base good, a must for the halftones, makes it so the halftones don't fill out on the glass, and gel retarder so the ink is not so runny.
230 mesh, cranked the off contact up, not sure of the height but with that Black ink laying down it would lift the glass up with the screen, so I spray a touch of adhesive down, (i don't use spray for the shirts, just special things like this..
Also I put a piece of glass behind it. Since the print starts right at the edge of the glass it would be an abrupt start, this way I can put the squeegee down and start the stroke before I even get to the print which made the print stroke more uniform. The screen would peel right up behind the squeegee..