« previous next »
Pages: [1] 2   Go Down

Author Topic: Printing Backpacks at 900+/hr  (Read 4284 times)

Offline Clark

  • Sr. Member
  • ****
  • Posts: 265
Printing Backpacks at 900+/hr
« on: August 10, 2011, 04:22:49 PM »
In this  1 min clip, you'll see 16 backpacks come off the press.  This is for you guys with a small space.  YOu don't necessarily need 5K sf to be efficient.  We had four people in the shop working on this job, and knocked the whole thing out in around 6 hr and 10 min.  When we had to reload the folder would run to the front and reload the loading station.  Overall through the entire day, we averaged 13.5 prints per minute or 810 pieces per hour.  And I taught some guys born in 1994 what rap sounded like in the 9-Deuce. :)

Printing back packs at 900+/hr
Logged

Offline sportsshoppe

  • !!!
  • Hero Member
  • *****
  • Posts: 649
  • A way of life.
Re: Printing Backpacks at 900+/hr
« Reply #1 on: August 10, 2011, 04:53:21 PM »
Sweet... what kind of ink did you use ??? nice process you had going
Logged

Offline Clark

  • Sr. Member
  • ****
  • Posts: 265
Re: Printing Backpacks at 900+/hr
« Reply #2 on: August 10, 2011, 04:56:59 PM »
Rutland super poly ink.  125 mesh and smilin jack squeegee with the beveled edge.
Logged

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: Printing Backpacks at 900+/hr
« Reply #3 on: August 10, 2011, 05:21:52 PM »
Awesome.  Nice music too....
Logged
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline whitewater

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1830
Re: Printing Backpacks at 900+/hr
« Reply #4 on: August 10, 2011, 05:31:58 PM »
nice dude..
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Printing Backpacks at 900+/hr
« Reply #5 on: August 10, 2011, 05:59:43 PM »
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3208
Re: Printing Backpacks at 900+/hr
« Reply #6 on: August 10, 2011, 06:04:22 PM »
we bump the Biggie smalls. . .and Cypress Hill. . . .had to feel nice typing up that invoice.
Logged
...keep doing what you're doing, you'll only get what you've got...

Offline cattees

  • Verified/Junior
  • **
  • Posts: 50
Re: Printing Backpacks at 900+/hr
« Reply #7 on: August 10, 2011, 06:33:54 PM »
That is awesome...I am envious..hope to be that big one day!
Logged

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Printing Backpacks at 900+/hr
« Reply #8 on: August 10, 2011, 07:54:04 PM »
Newman tape over the platen brackets - nice move. 
Logged

Offline squeegee

  • Sr. Member
  • ****
  • Posts: 379
Re: Printing Backpacks at 900+/hr
« Reply #9 on: August 10, 2011, 08:03:24 PM »
Good numbers, gotta love jobs like that.  Just curious, why 2 people loading?
Logged

Offline Clark

  • Sr. Member
  • ****
  • Posts: 265
Re: Printing Backpacks at 900+/hr
« Reply #10 on: August 10, 2011, 08:18:36 PM »
The pockets were 9 1/4" and the platens were 8".  They were really tough to get on. The flap on the pocket had to be folded up and the zippers had to be unzipped completely.  Doing all that with only one person wasn't cuttin it speed wise.  So after about 10 minutes I pulled another guy up there.  Basically with two loaders it gave each loader one index to get the pockets opened enough to load quickly.  If you look closely Moises and I are folding over the pocket flap and pulling the pocket open to kick back the zipper.  We got another 30dz an hour with the extra loader.  It was a no brainer to keep him up there after we saw the speed increase.
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Printing Backpacks at 900+/hr
« Reply #11 on: August 10, 2011, 08:26:37 PM »
Upcharge for the zipper etc?

I hate doing that stuff, plus you just increased your labor expense 25% to stay
at decent production speed.

Individually bagged, folded, with tissue, and size label where the print goes. Delightful.

Logged

Offline Clark

  • Sr. Member
  • ****
  • Posts: 265
Re: Printing Backpacks at 900+/hr
« Reply #12 on: August 10, 2011, 08:29:19 PM »
Took 22 man hours to get them out of the plastic and get them unzipped for production.

And the price went up .25 per when the first box came off the truck.  The front pocket was supposed to be 10".  We actually had to wait a half hour to unload the truck to get approval on the upcharge.
« Last Edit: August 10, 2011, 08:31:52 PM by Clark »
Logged

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Printing Backpacks at 900+/hr
« Reply #13 on: August 10, 2011, 09:05:41 PM »
Clark I still do bags on my manual one at a time and it sucks,  looking at your vid I,m going to try and work something on our auto, big Thanks for the vid!!

Darryl
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: Printing Backpacks at 900+/hr
« Reply #14 on: August 10, 2011, 09:21:54 PM »
Smilin' Jack.Didn't know anyone besides a few used them.You must like them?
Logged
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA
Pages: [1] 2   Go Up
« previous next »