Author Topic: printing on burn out tees  (Read 2293 times)

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3539
printing on burn out tees
« on: January 23, 2014, 11:05:17 AM »
We've tried printing on burn outs a couple of times, but i've never been super crazy with the results. A long time client emailed me and asked if we would print them some, even though i tried persuading them not to go that route.

So, what should i be doing to print on burn outs? It's a darker colored burn out with a white imprint. Should i be using waterbased? should i use poly plastisol? I planned on using 156 screens, but i'm wondering if i should go lower?
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285


Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: printing on burn out tees
« Reply #1 on: January 23, 2014, 11:12:43 AM »
Sending you an e-mail

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: printing on burn out tees
« Reply #2 on: January 23, 2014, 11:23:55 AM »
A few threads on this here.
Here's the one I started some time back.

http://www.theshirtboard.com/index.php/topic,4250.msg47012.html#msg47012
That rug really tied the room together, did it not?

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3539
Re: printing on burn out tees
« Reply #3 on: January 23, 2014, 11:26:22 AM »
thank you tony and frog!
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3539
Re: printing on burn out tees
« Reply #4 on: January 23, 2014, 11:34:32 AM »
our problem, is that the client wants a bold image. not a burned out image.

would a transfer work?
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: printing on burn out tees
« Reply #5 on: January 23, 2014, 11:41:53 AM »
Most likely

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: printing on burn out tees
« Reply #6 on: January 23, 2014, 11:46:03 AM »
I thought posted something here, but see it's gone :o, but anyway last time we did burn outs I used regular plastisol ink with a little reducer and the print was somewhat bold, my only problem was not burning holes in them using our quartz flash and getting ink on the pallets.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: printing on burn out tees
« Reply #7 on: January 23, 2014, 12:16:48 PM »
We just printed these this morning... Pretty bold image, client didn't want to see any "burnout" through the ink...... Must have a good dye blocking ink, and we have good luck using a roller squeegee on these to keep the print real smooth and flat.... If you need help send me a pm with the design


Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: printing on burn out tees
« Reply #8 on: January 23, 2014, 12:21:50 PM »
We run a couple hundred of these a week using plastisol. I do prefer discharge but this client has to have it bright as well. I am not a fan of low mesh but on these it is a given. We use a 135 for the underprint and 180 for the highlight white. The 135 is enough to fill in the voids and the 180 highlight over the top smooths it out nicely. Now the biggest thing on these is to use a smoothing screen. Gel it just enough to not stick and your end result will be as smooth as a transfer without any voids in the fabric. Done right you will get very little ink left on the pallets.

We are printing about 300 of these this afternoon or first thing in the morning. I will post a pic when done.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: printing on burn out tees
« Reply #9 on: January 23, 2014, 01:10:26 PM »
Eric for the Alt App stuff a DC?ub should. When I worked there we R&Dd them and the did very well

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: printing on burn out tees
« Reply #10 on: January 23, 2014, 02:05:35 PM »
If it is one color, I would run these as a transfer simply for cleanliness, but that would just be my preference.
« Last Edit: January 23, 2014, 02:13:44 PM by mimosatexas »

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: printing on burn out tees
« Reply #11 on: January 23, 2014, 02:05:53 PM »
We used our heat press to smooth them down, Crossfitters must love these things that's who we print them for also.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Action1

  • Sr. Member
  • ****
  • Posts: 486
Re: printing on burn out tees
« Reply #12 on: January 23, 2014, 03:16:54 PM »
We just printed these this morning... Pretty bold image, client didn't want to see any "burnout" through the ink...... Must have a good dye blocking ink, and we have good luck using a roller squeegee on these to keep the print real smooth and flat.... If you need help send me a pm with the design

We need a "Like" Button.

Great to hear another useful application of the roller squeegee. Thank you for sharing Danny.

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: printing on burn out tees
« Reply #13 on: January 23, 2014, 04:30:14 PM »
If it is one color, I would run these as a transfer simply for cleanliness, but that would just be my preference.

The proper use of a smoothing screen yields the same results. The Cool thing is that you can even do it on a manual press.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: printing on burn out tees
« Reply #14 on: January 23, 2014, 04:41:25 PM »
anyone have a link to a video or tutorial explaining the smoothing screen?