Author Topic: Just ordered an i-Image ST...  (Read 9705 times)

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: Just ordered an i-Image ST...
« Reply #30 on: November 28, 2013, 08:38:02 PM »
Well I'll jump in on that. It's been a while
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA


Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Just ordered an i-Image ST...
« Reply #31 on: November 29, 2013, 09:29:35 AM »
I can guarantee you if we went CTS I would still have at least one unhappy guy out back and he would benefit the most from it.  The other two are too stupid to know what they have so CTS would benefit me and the business most of all.  You can give then all the best tools and equipment and in the end it still might not make some happy.  About the only thing we don't have is a CTS and my guys wouldn't last a week in another shop, they'd come crawling back to us, I know, I've seen it happen more than once.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline Socalfmf

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1238
  • Lead, Follow or Get Out of the Way!
Re: Just ordered an i-Image ST...
« Reply #32 on: November 29, 2013, 09:39:33 AM »
Alan

If what you are saying is true, then I think it is time to revisit your staff and time to clean house.  my guys are so happy because they have some of the best tools to use in their job!  they have up-to-date technology which lets them work smarter not harder.  we have systems in place so they can success and take ownership of their position. 

If I felt that way about anyone on my staff there would be a counseling session and then a termination if thing did not improve. 

and btw having a revolving door is not good for business. 

sam

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Just ordered an i-Image ST...
« Reply #33 on: November 29, 2013, 11:55:48 AM »
Bottom line, once you have a CTS, you will kick your self for a few months because you didn't do it sooner!!!!
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline Ron Pierson

  • Full Member
  • ***
  • Posts: 164
Re: Just ordered an i-Image ST...
« Reply #34 on: December 16, 2013, 07:39:26 PM »
OK - here we go - the unit arrived today, crated.
M&R has requested we wait for the tec to uncrate...I'm good with that, he will be here Wednesday.
Much thanks to everyone who got us here and will bring us further.

I will continue to keep everyone in the loop...

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: Just ordered an i-Image ST...
« Reply #35 on: December 16, 2013, 08:16:18 PM »
What are you going to build with the crate ;D
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline Ron Pierson

  • Full Member
  • ***
  • Posts: 164
Re: Just ordered an i-Image ST...
« Reply #36 on: December 16, 2013, 09:01:36 PM »
HA - a second story for all the burnt screens this machine will be able to produce...
We use 300+ a day here. We SHOULD be able to "keep up" now!!

Offline abchung

  • !!!
  • Sr. Member
  • ****
  • Posts: 481
Re: Just ordered an i-Image ST...
« Reply #37 on: December 16, 2013, 09:45:30 PM »
What are you going to build with the crate ;D
haha now you mentioned crates. it would be nice to see M&R do a time lapse YouTube clip of a packaging process.

Santa came early for you guys. have fun.

Offline Ron Pierson

  • Full Member
  • ***
  • Posts: 164
Re: Just ordered an i-Image ST...
« Reply #38 on: December 19, 2013, 08:23:05 PM »
WE have been in training for 2 days. will have another short day tomorrow then.........
We're OFF TO THE RACES. THis thing looks like it will be a game changer for sure. Super nice tec here to help - VERY knowledgeable and patient!!
A big shout out to M&R for another home run.

Offline Socalfmf

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1238
  • Lead, Follow or Get Out of the Way!
Re: Just ordered an i-Image ST...
« Reply #39 on: December 19, 2013, 08:25:38 PM »
Ron

so have you done an ROI on it yet?  what do you think it will be? 

Looks sweet and I bet you are going to see a huge difference from doing film and output from the machines ect.

sam

Offline Ron Pierson

  • Full Member
  • ***
  • Posts: 164
Re: Just ordered an i-Image ST...
« Reply #40 on: December 19, 2013, 08:52:20 PM »
Hi Sam

Our ROI will be different as there are more moving parts to this puzzle than just this piece. The moving parts are too many to list - I'll mane a few....

Just one of the moving parts was proper screens for this. We spent about $25K on that alone (all during the the year). It has put us in a "no tape" arena. Just that savings, all by itself, saved us around $8-10K this year. No more film (BIG one) - 8-12 rolls a week - you add it up. There are more hard pieces of equipment on the way as well.

We think ROI will arrive somewhere around next fall or into 2015.

I'll keep everyone aware of our progress....

Offline Mr Tees!!

  • Hero Member
  • *****
  • Posts: 661
Re: Just ordered an i-Image ST...
« Reply #41 on: December 19, 2013, 10:10:30 PM »
Hi Sam

Our ROI will be different as there are more moving parts to this puzzle than just this piece. The moving parts are too many to list - I'll mane a few....

Just one of the moving parts was proper screens for this. We spent about $25K on that alone (all during the the year). It has put us in a "no tape" arena. Just that savings, all by itself, saved us around $8-10K this year. No more film (BIG one) - 8-12 rolls a week - you add it up. There are more hard pieces of equipment on the way as well.

We think ROI will arrive somewhere around next fall or into 2015.

I'll keep everyone aware of our progress....

Ron, can you clarify what you mean by this? Is this the clear tape used for regi's and film attachment only? If so, HOLY COW.....how many production ready screens does that represent per day?
Thanks TSB gang!!

...Sean, Mr Tees!!!

Offline RichN

  • Verified/Junior
  • **
  • Posts: 24
Re: Just ordered an i-Image ST...
« Reply #42 on: December 20, 2013, 11:21:49 AM »
WE have been in training for 2 days. will have another short day tomorrow then.........
We're OFF TO THE RACES. THis thing looks like it will be a game changer for sure. Super nice tec here to help - VERY knowledgeable and patient!!
A big shout out to M&R for another home run.
Congratulations Ron. Who was your tech for set up?
Rich Nesladek
M&R Sales & Service, Inc. Director of Sales / Western Division 831-420-1390 rich.nesladek@mrprint.com

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Just ordered an i-Image ST...
« Reply #43 on: December 20, 2013, 11:57:49 AM »
Hi Sam

Our ROI will be different as there are more moving parts to this puzzle than just this piece. The moving parts are too many to list - I'll mane a few....

Just one of the moving parts was proper screens for this. We spent about $25K on that alone (all during the the year). It has put us in a "no tape" arena. Just that savings, all by itself, saved us around $8-10K this year. No more film (BIG one) - 8-12 rolls a week - you add it up. There are more hard pieces of equipment on the way as well.

We think ROI will arrive somewhere around next fall or into 2015.

I'll keep everyone aware of our progress....

Ron, can you clarify what you mean by this? Is this the clear tape used for regi's and film attachment only? If so, HOLY COW.....how many production ready screens does that represent per day?

If I recall he said ho does around 300 a day. A number 90% of us here could not even imagine.
"No man is an island"