Author Topic: Screen Room Questions  (Read 2260 times)

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: Screen Room Questions
« Reply #15 on: November 27, 2012, 11:52:27 PM »
Never suck air out, push filtered air in.
Wishin' I was Fishin'


Offline brandon

  • Gonzo Member
  • ******
  • Posts: 1709
Re: Screen Room Questions
« Reply #16 on: November 28, 2012, 12:28:52 AM »
Yup, John helped me a couple of years ago with this. Always over 80 degrees in there and always under 40 on the humidity. We get freaking cold up here and our warehouse is older so we just leave the heater on all the time in the screen room. We are knocking down walls / expanding / building in a few months and can't wait to redo our system. Multiple rooms connected like Tony was saying. And we don't fridge anything except beer and food

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: Screen Room Questions
« Reply #17 on: November 28, 2012, 01:06:06 AM »
I refrigerate my emulsion. If I don't in the summer it will go bad in a day (Arizona). I leave it in the fridge in the winter also. Why you may ask. Consistency, I know my emulsion is the same temp every time I coat my screens. It may not mater but if you can control a variable in the process why not.