Author Topic: Has this happened to anybody?  (Read 3237 times)

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Has this happened to anybody?
« Reply #15 on: August 20, 2012, 12:31:25 PM »
Taken from Rutland website:
*Note to 100% Cotton users: 100% Cotton could have a ghost image appear if printed with low bleed
inks. NPT SF Low Bleed White is a low bleed ink and should not be printed on 100% Cotton. NPT SF
Low Bleed White is recommended for polyester/cotton blends.

Of course after I print about a thousand shirts I read the tech sheet. I have only used LB inks on all my 100% cotton and never heard of this.
jerry in 30 years this has happened to me once and i have heard of this happening maybe 5 other times. you will be fine using just the streetfighter low bleed product in my opinion.
Specializing in shop assessment's, flow and efficiency


Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Has this happened to anybody?
« Reply #16 on: August 20, 2012, 12:41:31 PM »
Taken from Rutland website:
*Note to 100% Cotton users: 100% Cotton could have a ghost image appear if printed with low bleed
inks. NPT SF Low Bleed White is a low bleed ink and should not be printed on 100% Cotton. NPT SF
Low Bleed White is recommended for polyester/cotton blends.

Of course after I print about a thousand shirts I read the tech sheet. I have only used LB inks on all my 100% cotton and never heard of this.
jerry in 30 years this has happened to me once and i have heard of this happening maybe 5 other times. you will be fine using just the streetfighter low bleed product in my opinion.
I figured I would as I have been using LB inks since I started and never had a problem. I just never seen it written as something that could happen, thanks

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: Has this happened to anybody?
« Reply #17 on: August 20, 2012, 12:59:31 PM »
it happened to us once...about 12 years ago on Hanes Beefy's of course.  PITA

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Has this happened to anybody?
« Reply #18 on: August 20, 2012, 02:31:25 PM »
Taken from Rutland website:
*Note to 100% Cotton users: 100% Cotton could have a ghost image appear if printed with low bleed
inks. NPT SF Low Bleed White is a low bleed ink and should not be printed on 100% Cotton. NPT SF
Low Bleed White is recommended for polyester/cotton blends.

Of course after I print about a thousand shirts I read the tech sheet. I have only used LB inks on all my 100% cotton and never heard of this.
jerry in 30 years this has happened to me once and i have heard of this happening maybe 5 other times. you will be fine using just the streetfighter low bleed product in my opinion.
I figured I would as I have been using LB inks since I started and never had a problem. I just never seen it written as something that could happen, thanks

They are just covering their asses.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin