Author Topic: Anatol Trident  (Read 354 times)

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 573
Anatol Trident
« on: November 12, 2024, 09:47:50 AM »
we are scrapping our 10 color Anatol Trident - anybody want a press?

we haven't used our Trident in a long time - the owners here want it to be gone by the end of the month.

good:  its free + some spare parts
bad: its a 2001ish ? - lots of air leaks, rebuilt flash, air heads, don't know how many prints...
ugly: have to reprogram it every morning because the battery/battery clip doesn't work. flash sometimes sticks on and doesn't turn off by itself, one laser sensor doesn't work

we use the platens on our other presses, but the some squeegees and floodbars come with the press.

im looking for someone to come and disassemble and take it away from our shop in Somersworth NH.

pictures available to those interested


Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Anatol Trident
« Reply #1 on: November 12, 2024, 11:23:07 AM »
Hmmmm.....know that press well! It's the one that used to want to cycle all by itself when there was no one in the building but me. Good times. Sure that was fixed long ago. Hope it doesn't go the way of the Vindicator.

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 573
Re: Anatol Trident
« Reply #2 on: November 12, 2024, 11:45:00 AM »
it dosent cycle by itself anymore.

we cant get anyone to run it - all the other presses/press operators use the tri-loc and we only have one person who knows how to set up the anatol...

the goal is to replace it with a 12 or 14 color M&R. 

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Anatol Trident
« Reply #3 on: November 12, 2024, 11:50:27 AM »
Very wise D. I believe you're pretty much all M&R at this point. Best of luck.
tp