Author Topic: problem printing on hoodie  (Read 3895 times)

Offline garneauk

  • Newbie
  • *
  • Posts: 6
problem printing on hoodie
« on: September 12, 2021, 07:27:31 PM »


Hi there, on my picture
on the left the hoodie is made with my diamondback
on the right with my sidewinder
with the diamondback I always have screen resgistration problem with hoodie, the second layer of white is always off
white is Quick white, 110 mesh
flash time 8 seconds
50 psi on the head
can someone help me with this? thanks


Offline garneauk

  • Newbie
  • *
  • Posts: 6

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1093
Re: problem printing on hoodie
« Reply #2 on: September 12, 2021, 10:21:22 PM »
8 seconds. wow how far away and what temp. to hot the shirt will move. I use flash spray. i am 2" or less and 750 and doing 4 seconds. why 110 mesh with that image. to thick possibly.
Shane

Sent from my SM-G975U using Tapatalk


Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: problem printing on hoodie
« Reply #3 on: September 15, 2021, 06:50:50 PM »
thinner deposit of ink will flash faster and you will not have to heat up the garment as much. Try a 160 for ubase, maybe even a 230. Also use a fast flashing white ink.
That looks like it's too much shrinkage for just the flash though, something else might be going on.
do the shirts print fine?
we need more info.
pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: problem printing on hoodie
« Reply #4 on: September 16, 2021, 07:55:08 AM »
We have found that "placing" the hoodies on the platen and not sticking them down, run them through the flash to "pre shrink" the fabric let them cool and then stick them down and print as usual makes a big difference especially on tight registration and or larger prints.
It is a major  PITA but so is replacing hoodies....I hate hoodies
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline BP

  • Sr. Member
  • ****
  • Posts: 380
Re: problem printing on hoodie
« Reply #5 on: September 16, 2021, 10:54:31 AM »
We have also ran the hoods thru the dryer before print them.
SHIRT HAPPENS!

Offline Croft

  • Hero Member
  • *****
  • Posts: 875
Re: problem printing on hoodie
« Reply #6 on: September 16, 2021, 11:44:11 AM »
with our RENO flash at 500* on our sportsman we can't go over 4.5-5 seconds or will definitely have problems