2012 12-Color A/C Servo Press and 2012 60" wide x 12' heat Gas Dryer for Sale

[ScreenPrinter123]

Looking to step down from the print scene, so if anyone is interested in either just equipment or interested in purchasing the whole business (equipment, building and customer list), just PM us.

I have two listings on Digitsmith that I'll link to below -- the first one is just for the main 2 pieces of equipment -- press and dyer -- and the second link lists most everything short of the nitty gritty items.  Thank you for your interest, and I'd be happy to answer any questions if you are interested (hopefully the links below hyperlink automatically -- if not just copy and paste them). 


http://www.digitsmith.com/2012-12-color-c-servo-press-2012-gas-dryer-sale-56935.html

http://www.digitsmith.com/screen-printing-operation-sale-new-orleans-56645.html



Sincerely,
Brian

[ScreenPrinter123]

UPDATE:

Something I've thrown out to someone that I'd be more than open to making available to anyone:  If you're not in the market for a press or a dryer, but you are in the market for one of our other line items listed here (http://www.digitsmith.com/screen-printing-operation-sale-new-orleans-56645.html) -- for example, the compressor or the mzx screens or even the exposure unit -- if you can find a buyer for the two main pieces of equipment (press and dryer, or even at a worst case scenario, just the press), I have no problem giving away one of the line items as effectively a finder's fee. 

Unfortunately, we can't part with the smaller items until the 2 main items are sold since everything is in use until then.

This avenue of getting something for free if you can refer a buyer seems to be a win/win/win if anyone is interested. 

Thanks again,
Brian

[LoneWolf2]

Those mustangs are some cool presses. Who would be available to setup/breakdown and "tech" this press?

[ScreenPrinter123]

Can happily pass along the direct contact info and introduce the buyer to the state side engineer of the press (he assembles the rpm’s, mustangs, vector’s, etc. and does the coding and electrical on the presses) who did the install at our shop and has answered questions, walked us through some upgrades and sent parts for upgrades since the press was installed, etc.

Thanks LW,
Brian