Author Topic: Standard Point size stroke for Photoshop.... 8/8  (Read 876 times)

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Standard Point size stroke for Photoshop.... 8/8
« on: August 08, 2018, 04:12:25 PM »
What point size stroke are most of you using in Photoshop? 300 DPI files.
Asking for a friend :)   My design guys is out for a few days and
I have to output some raster art.

Thanks.  John


Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: Standard Point size stroke for Photoshop.... 8/8
« Reply #1 on: August 08, 2018, 05:00:32 PM »
I use 3 px for photoshop, and 1.35 pt for illustrator.  Both set to align to center.

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Standard Point size stroke for Photoshop.... 8/8
« Reply #2 on: August 08, 2018, 08:47:00 PM »
At 300 dpi - 1 pixel.

At 600 dpi - 3 pixels.

All to the inside.

Your mileage will vary :)
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: Standard Point size stroke for Photoshop.... 8/8
« Reply #3 on: August 08, 2018, 09:52:10 PM »
Your size will determine your stroke. ;)
Small imprints like left chest and Pocket prints, (if I get my way) I do at 600ppi and stroke/choke 3 pixels.
I'd like to do 1.5 at 300ppi, but can't do that so...I go 2 pixels.  I tried just one, but it causes some issues at times depending.
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Re: Standard Point size stroke for Photoshop.... 8/8
« Reply #4 on: August 09, 2018, 09:25:19 AM »
thanks very much!

John