Author Topic: I created a shape and it will not fill  (Read 3329 times)

Offline Mark @ Hurricane Printing

  • Hero Member
  • *****
  • Posts: 567
I created a shape and it will not fill
« on: November 10, 2017, 06:14:14 AM »
coreldraw x5

I created a shape using the bezier....all nodes are connected and i also did the "weld"....When I select the object to fill it, it wont fill. I can change the outline color but inside the object wont fill.
Mark


Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: I created a shape and it will not fill
« Reply #1 on: November 10, 2017, 11:00:34 AM »
1   start with your object

2    change the outline to an object

3 break the curve apart

4 you get two filled objects one equal to the outer dimension and one equal to the inner dimension.

mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline larryk

  • !!!
  • Sr. Member
  • ****
  • Posts: 439
Re: I created a shape and it will not fill
« Reply #2 on: November 10, 2017, 12:14:05 PM »
I am more inclined to think your object is not closed.  Zoom in on your nodes and check them all.