squeegee corners

[ffokazak]

We have a Quik-clamp, and you can bang out 50 squeegee replacements In no time.

Just get a combination belt disc sander, and you can burn through em in a second or two each.

[tonypep]

We love the Quikclamp as well

[ffokazak]

Quik-clamp makes squeegees such a breeze.

I shudder thinking of how hard it was to replace blades in the old one piece M&R holders...

This system is a luxury, but for a couple grand it would be hard to ever go back to the old style...

[ZooCity]

We miss the quick clamp.  Wanging blades into the holders with a mallet feels super dumb once you've used the system. 

[ffokazak]

We put it good use, thanks Zoo!

[ScreenFoo]

I've got a 1 x 6 plank with some course sandpaper glued to it, I just rub the corners on it just enough to knock the sharp edge off.

I use the sidewalk outside, it's always set up and ready to go.
Finish with some 300-400 grit and it's ready for press.

Of course, I do like four at a time, so this only applies to low volume shops. 

[screenxpress]

I've got a 1 x 6 plank with some course sandpaper glued to it, I just rub the corners on it just enough to knock the sharp edge off.

I use the sidewalk outside, it's always set up and ready to go.
Finish with some 300-400 grit and it's ready for press.

Of course, I do like four at a time, so this only applies to low volume shops. 

If you did it right, you could play hopscotch from the residue marks..... 

[TCT]

https://www.harborfreight.com/6-inch-bench-grinder-39797.html

I use a bench grinder, does a great job.

We use pretty much this same one.

[domineight]

I've got a 1 x 6 plank with some course sandpaper glued to it, I just rub the corners on it just enough to knock the sharp edge off.

I use the sidewalk outside, it's always set up and ready to go.
Finish with some 300-400 grit and it's ready for press.

Of course, I do like four at a time, so this only applies to low volume shops. 

Same. Walk outside to the car park and a couple quick scrapes on the corner sorts it.
That action of drawing the squeegee toward you just gives the natural perfect radius.

If you did it right, you could play hopscotch from the residue marks..... 

[JmanRT]

Dremel is what I️ use. Cheap and easy


Sent from my iPhone using Tapatalk

[screenxpress]

I used a Delta unit I had that looked just like this.  Worked quick and easy.

https://www.amazon.com/Goplus-30-Inch-Grinder-Sanding-Machine/dp/B019H0PUF8/ref=sr_1_7?ie=UTF8&qid=1510716792&sr=8-7&keywords=sander+belt+and+disk