Author Topic: How would you print this then?  (Read 1590 times)

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2073
How would you print this then?
« on: June 13, 2017, 08:15:07 PM »
Would it be advisable to put the black text on a separate screen away from the halftones? Goes on white tees.


Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1481
Re: How would you print this then?
« Reply #1 on: June 13, 2017, 08:36:50 PM »
I usually put the text on a separate screen unless, the halftone screen would work on a 225, that way I can get by with one stroke to get opake lettering.  If I had to put the halftones on a 280, then definitely a separate screen to avoid blowing out my image trying to get opake lettering.
« Last Edit: June 13, 2017, 08:41:53 PM by Doug S »
It's not a job if you love doing it.

Offline Orion

  • !!!
  • Hero Member
  • *****
  • Posts: 764
  • Ain't no shortcuts in screen printing.
Re: How would you print this then?
« Reply #2 on: June 14, 2017, 08:35:19 PM »
An alternative is to add percentages of other colors in the separations. With the process black printing solid that should leave you 140-160%, whatever the total ink limit is for the print. For example, in a 4 color process, black text at 100% and the cyan magenta yellow set to print at 45- 50% behind the black.
Dale Hoyal

Offline tse1990

  • !!!
  • Verified/Junior
  • **
  • Posts: 51
Re: How would you print this then?
« Reply #3 on: June 15, 2017, 09:23:06 AM »
We typically do text, flash then the other colors.

Offline Prince Art

  • Hero Member
  • *****
  • Posts: 793
Re: How would you print this then?
« Reply #4 on: June 17, 2017, 12:08:47 AM »
We typically do text, flash then the other colors.

I might do this. But I'd also consider skipping the flash, and using the "heavy black" text screen to beef up the most saturated areas of the photo image, too.
Nice guys laugh last.