Author Topic: How would you sep/print this?  (Read 2615 times)

Offline sqslabs

  • Hero Member
  • *****
  • Posts: 972
  • Work hardened.
How would you sep/print this?
« on: June 11, 2016, 09:32:51 PM »
I figured this one would be pretty straightforward, but its going on black, navy and light grey shirts and I'm having trouble getting my head wrapped around the way to sep it.  Is underbasing the whole thing the only way to see the same results on darks and lights?  Already set it up once (and failed), and would like to get it right the second time around.  Interested to hear how others would tackle it before round two next week.
Brett
Squeegee Science
Fort Lauderdale, FL


Offline zanegun08

  • Hero Member
  • *****
  • Posts: 688
Re: How would you sep/print this?
« Reply #1 on: June 12, 2016, 12:21:05 AM »
Under base it all, and maybe you can get away with no base on light grey (silver?) but if you want consistent results under base it all.

Or do discharge / discharge base it since Black, Navy and Silver would work well for it, you will get some color shifts due to the fabric probably.

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: How would you sep/print this?
« Reply #2 on: June 12, 2016, 12:45:47 AM »
Base on all colors for consistent color, even white shirts.
Blacktop Graphics Screenprinting and Consulting Services

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: How would you sep/print this?
« Reply #3 on: June 12, 2016, 01:23:48 AM »
I sent you a file to review to se how I would do it.
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: How would you sep/print this?
« Reply #4 on: June 12, 2016, 11:32:21 AM »
Can you discharge them all? Then I would do it like that, 5 colors.
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline sqslabs

  • Hero Member
  • *****
  • Posts: 972
  • Work hardened.
Re: How would you sep/print this?
« Reply #5 on: June 12, 2016, 06:02:19 PM »
Thanks guys, full base it is..  Discharge is not in the cards for this one.
Brett
Squeegee Science
Fort Lauderdale, FL

Offline JORDANART

  • Verified/Junior
  • **
  • Posts: 23
  • jordandowningart.com
Re: How would you sep/print this?
« Reply #6 on: June 23, 2016, 08:40:16 AM »
  Not underbasing the Dark Grey and Light Grey may work. I printed dark and light grey without an underbase going on a black tee with in the past couple weeks and the end result was really nice. Much softer feel than using a big slab of ink for the underbase.