« previous next »
Pages: [1]   Go Down

Author Topic: Can you help me on print order on this one?  (Read 1273 times)

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Can you help me on print order on this one?
« on: May 12, 2016, 03:05:30 PM »
I'm looking to print this in this order: ( workhorse cutlass 6 color)
1-White base 150s mesh
2- red 230 mesh
3-light blue 230 mesh
4- yellow 230 mesh
5- flash
6- dark blue 230 mesh

Would there be any reason this wouldn't work? I have 2 flashbacks, or I can run it in orbital mode...

Let me know your thoughts, and thank you all!!!

Logged

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Can you help me on print order on this one?
« Reply #1 on: May 12, 2016, 03:09:24 PM »
That is about what I would except maybe drop the yellow down to a 180 or so.
Logged

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5326
Re: Can you help me on print order on this one?
« Reply #2 on: May 12, 2016, 04:07:19 PM »
To do only one flash I would do this

1 white = flash
2 Red
3 Dark Blue
4 Light Blue
5 Yellow

mesh counts looks fine to me, either way you go it will be fine since you have two flashes which will not slow you down.
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: Can you help me on print order on this one?
« Reply #3 on: May 12, 2016, 08:40:21 PM »
I decided to go with how I originally thought... It turned out really well. Super smooth print!
Logged

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Can you help me on print order on this one?
« Reply #4 on: May 12, 2016, 09:46:58 PM »
Your choice of mesh was dead on.. thats why that print ran so well.
Logged
Specializing in shop assessment's, flow and efficiency
Pages: [1]   Go Up
« previous next »