Author Topic: Holy crap these shirts are messy!  (Read 1752 times)

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Holy crap these shirts are messy!
« on: May 04, 2016, 07:07:49 PM »
So we are on a run of 5,000 black Hanes 5250 and we are just about done with the fronts and today I notice the floor is a absolute mess from the shirts.
We are running larger and larger orders now, and I am curious to hear how you guys keep clean while running large orders? There is lint floating across my shop onto my inks and dirty screen racks. Just wondering if you all have any tips on how to prevent this, or at least calm it down a bit.

Thanks everyone!


Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: Holy crap these shirts are messy!
« Reply #1 on: May 04, 2016, 10:10:30 PM »
Just send those larger orders to me and you can do the 48 piece runs  ;D
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline mt_signex

  • Verified/Junior
  • **
  • Posts: 61
Re: Holy crap these shirts are messy!
« Reply #2 on: May 04, 2016, 10:30:23 PM »
Just wait until you print a few thousand Comfort Colors :-/

I have this.. it gets the job done!

Just to note, the lint on the floor was from scrubbing platens to refresh the adhesive, this unit catches about 90% of the lint but some still seems to find its way onto every surface.

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
Re: Holy crap these shirts are messy!
« Reply #3 on: May 07, 2016, 09:37:22 AM »
How noisy is the fan?
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il

Offline mt_signex

  • Verified/Junior
  • **
  • Posts: 61
Re: Holy crap these shirts are messy!
« Reply #4 on: May 07, 2016, 07:07:02 PM »
How noisy is the fan?

It's a standard blower motor that goes in a household furnace unit (I got it for free from a friend that owns a hvac company) so it's not super quiet but not any louder than the air compressor and auto running.  You could find a quieter fan but to catch the most lint you need one that cycles a lot of air if you're printing fast.

Offline Lizard

  • Sr. Member
  • ****
  • Posts: 306
Re: Holy crap these shirts are messy!
« Reply #5 on: May 07, 2016, 10:55:39 PM »
We have those under the load/unload on all our presses.  Change the filters about every two days. We make ours with carpet drying blowers. They are not loud at all.
Toby
 Shirt Lizard Charlotte, NC 704-521-5225