« previous next »
Pages: [1]   Go Down

Author Topic: 65 or 55 lpi on hoodies  (Read 3413 times)

Offline AntonySharples

  • Full Member
  • ***
  • Posts: 221
65 or 55 lpi on hoodies
« on: March 31, 2016, 09:00:18 AM »
Working on a sim process job for some Independent hoodies.  We have never printed sim process on hoodies.  Those with experience on them, 65lpi ok or should we go 55?
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6368
Re: 65 or 55 lpi on hoodies
« Reply #1 on: March 31, 2016, 09:07:42 AM »
Quote from: eliteteamsupply on March 31, 2016, 09:00:18 AM
Working on a sim process job for some Independent hoodies.  We have never printed sim process on hoodies.  Those with experience on them, 65lpi ok or should we go 55?

45 if calibrated.

Pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5912
  • Email me at art@designsbydottone.com
Re: 65 or 55 lpi on hoodies
« Reply #2 on: March 31, 2016, 09:23:02 AM »
Agree.  You need a little more beef in your dot to work on the bigger weave as well as a slightly lower mesh like all 230's max or S mesh in order to get good saturation.

If using 55-65 or 305 mesh, is will be very light and airy looking. Not vibrant.
Logged
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline AntonySharples

  • Full Member
  • ***
  • Posts: 221
Re: 65 or 55 lpi on hoodies
« Reply #3 on: March 31, 2016, 10:21:42 AM »
Thanks guys!  I was thinking 45 originally, but wasn't sure if the detail would be there.  We'll give it a whirl.
Logged

Offline Ross_S

  • Sr. Member
  • ****
  • Posts: 349
Re: 65 or 55 lpi on hoodies
« Reply #4 on: March 31, 2016, 11:44:02 AM »
50 might be a better option to yield a little more detail but still able to be held on a lower mesh count
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4282
Re: 65 or 55 lpi on hoodies
« Reply #5 on: March 31, 2016, 12:05:52 PM »
Indy has a tighter weave face that prints like a cotton shirt for the most part.
Logged

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: 65 or 55 lpi on hoodies
« Reply #6 on: March 31, 2016, 10:37:05 PM »
Quote from: ebscreen on March 31, 2016, 12:05:52 PM
Indy has a tighter weave face that prints like a cotton shirt for the most part.

Definitely.  55lpi on Indy's french terry. 
Logged

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: 65 or 55 lpi on hoodies
« Reply #7 on: March 31, 2016, 10:59:46 PM »
^^Looks pretty nice.

Quote from: ebscreen on March 31, 2016, 12:05:52 PM
Indy has a tighter weave face that prints like a cotton shirt for the most part.

I was actually just going to suggest Hanes Print pro for the same reason.
Usually don't even have to change the setup past dropping OC...
Logged

Offline Lizard

  • Sr. Member
  • ****
  • Posts: 306
Re: 65 or 55 lpi on hoodies
« Reply #8 on: March 31, 2016, 11:02:51 PM »
We do quite a bit od sim process on hoodies with mix media ( tees and hoodies). Have good luck with a thinned down base to saturate into the fibers. 55 lip.  Printed this one this week.
Logged
Toby
 Shirt Lizard Charlotte, NC 704-521-5225
Pages: [1]   Go Up
« previous next »