Author Topic: going roller frames... M3 vs MZX  (Read 7279 times)

Offline shurloc

  • Full Member
  • ***
  • Posts: 188
Re: going roller frames... M3 vs MZX
« Reply #30 on: December 04, 2014, 02:00:37 PM »
Yes we did! We purchased the very limited stock they had left and them in the M/A, A and LF series ready to ship out. They had run down their stock and didn't want to go through the expense of creating new dies for the extrusions, so they allowed us to pick up the production of the frames. We've had a long relationship with them and were happy to accommodate their customers by continuing the line as they made it. We didn't add them to our website yet, but when our new site launches, the stock sizes should be listed.

If you want to kick me an email, I can send you over the current 'stock size' pricing. - Ron@shurloc.com
Online at: www.shurloc.com - Like Us On Facebook: shurloc.com/Facebook - How To Videos: shurloc.com/YouTube - Follow Us For Updates: shurloc.com/Twitter


Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Re: going roller frames... M3 vs MZX
« Reply #31 on: December 13, 2014, 05:36:50 PM »
Shur-Loc... 12/13

Offline shurloc

  • Full Member
  • ***
  • Posts: 188
Re: going roller frames... M3 vs MZX
« Reply #32 on: December 15, 2014, 02:44:36 PM »
What mesh count are you running and how quick after stretch did you take that?
Online at: www.shurloc.com - Like Us On Facebook: shurloc.com/Facebook - How To Videos: shurloc.com/YouTube - Follow Us For Updates: shurloc.com/Twitter