« previous next »
Pages: 1 [2]   Go Down

Author Topic: Metallic shimmer  (Read 5315 times)

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Metallic shimmer
« Reply #15 on: August 07, 2012, 10:11:34 AM »
This is unions gold shimmer through a 200 wasn't trying to get a real sparkle out of it just wanted the color of gold shimmer but the sparkle still showed up even through a 200 screen.

Logged
"No man is an island"

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Metallic shimmer
« Reply #16 on: August 07, 2012, 01:32:20 PM »
Quote from: DKgrafix on August 10, 2011, 12:11:16 PM
http://www.rjennings.com/browseproducts/PAGL-M128-1GAL-Brilliant-Silver-Shimmer.HTML

Any tips on printing these. The lowest available mesh I have is 110. I have seen that ink is to be printed with the 60-110 mesh.
Any other pointers would be appreciated.

you will be fine with 110..i wouldnt run anything lower with shimmer..
Logged
Specializing in shop assessment's, flow and efficiency

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Metallic shimmer
« Reply #17 on: August 07, 2012, 02:26:36 PM »
I'm burning a 160 (156) right now for a job using International Coatings Gold shimmer, and I know that I will flood(fill) - print and repeat.
Logged
That rug really tied the room together, did it not?

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Metallic shimmer
« Reply #18 on: August 07, 2012, 03:18:00 PM »
We actually run a 90/71 for WFX Silver and Gold shimmers!  Crazy I know but very effective. 

Is Union now phthalate-free?  I always wanted to use their shimmer since it magically prints through such high mesh counts by comparison but couldn't use their ink. 
Logged

Offline stitches4815

  • !!!
  • Hero Member
  • *****
  • Posts: 537
Re: Metallic shimmer
« Reply #19 on: August 07, 2012, 03:47:35 PM »
Quote from: ZooCity on August 07, 2012, 03:18:00 PM
We actually run a 90/71 for WFX Silver and Gold shimmers!  Crazy I know but very effective. 

Is Union now phthalate-free?  I always wanted to use their shimmer since it magically prints through such high mesh counts by comparison but couldn't use their ink.
Yes, Union has a phthalate free shimmer ink.
Logged

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: Metallic shimmer
« Reply #20 on: August 07, 2012, 04:23:28 PM »
I love my 123-55 mesh for silver, gold, and copper shimmers (Wilflex ink, Sefar mesh)
Logged
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Metallic shimmer
« Reply #21 on: August 07, 2012, 06:15:13 PM »
Quote from: bimmridder on August 07, 2012, 04:23:28 PM
I love my 123-55 mesh for silver, gold, and copper shimmers (Wilflex ink, Sefar mesh)

That sounds rad.  Might check some of that out.  The particle inks seem to really like those low count/thin thread meshes. 

Quote
Yes, Union has a phthalate free shimmer ink.

Also rad, I'll check into some of that too.
Logged

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Metallic shimmer
« Reply #22 on: August 07, 2012, 06:25:43 PM »
Quote from: ZooCity on August 07, 2012, 03:18:00 PM
We actually run a 90/71 for WFX Silver and Gold shimmers!  Crazy I know but very effective. 

Is Union now phthalate-free?  I always wanted to use their shimmer since it magically prints through such high mesh counts by comparison but couldn't use their ink. 

As far as few months ago, Shimmers were not phthalate-free inks.
I did talk to people at Union
Logged

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Metallic shimmer
« Reply #23 on: August 07, 2012, 06:26:12 PM »
We are pushing some Union Metallic Shimmer through a 110 right now into ribbed tanks... it's looking pretty good.  2 strokes. PFPFP (2 color)
Logged
Pages: 1 [2]   Go Up
« previous next »