« previous next »
Pages: [1]   Go Down

Author Topic: Epson 1430 with T-Rip  (Read 1209 times)

Offline travis.hoyme

  • Verified/Junior
  • **
  • Posts: 60
Epson 1430 with T-Rip
« on: June 28, 2014, 03:43:25 PM »
I'm printing a file through t-rip and it's only printing say half of the image and then spitting out the rest of the film unprinted.  Can anyone guide me in the right direction on how to fix this?
Logged

Offline sqslabs

  • Hero Member
  • *****
  • Posts: 972
  • Work hardened.
Re: Epson 1430 with T-Rip
« Reply #1 on: June 28, 2014, 03:59:51 PM »
In case you haven't, make sure the paper size setting in your rip program is correct.  If it's set to 8.5x11, and you're trying to print an 11x17, it would only print half the image.  I use Accurip and the settings in there override any settings in the program I'm outputting from.
Logged
Brett
Squeegee Science
Fort Lauderdale, FL

Offline travis.hoyme

  • Verified/Junior
  • **
  • Posts: 60
Re: Epson 1430 with T-Rip
« Reply #2 on: June 28, 2014, 04:41:05 PM »
That's not the issue.  I have it set right in there, and it's printing in the 11" x 17"  I think it has something to do with sending the information to the printer.  A pop up box said communication error.
Logged

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: Epson 1430 with T-Rip
« Reply #3 on: June 28, 2014, 06:45:17 PM »
Try shutting down and re starting. Sometimes that can clear out any errors. Sounds like a program glitch.
Logged
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline travis.hoyme

  • Verified/Junior
  • **
  • Posts: 60
Re: Epson 1430 with T-Rip
« Reply #4 on: June 28, 2014, 07:22:11 PM »
I had just restarted the program and computer when it happened.  I first installed the program last week, and the first 2 times trying to print this has happened.
Logged

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: Epson 1430 with T-Rip
« Reply #5 on: June 28, 2014, 08:22:59 PM »
You might try re installing the software.
Something didn't take tight. Look at all preferences.

I don't know for sure, I. Just guessing but wen glitchy things happen to printers, a restart or re install works most of the time. Sometimes a preference setting needs to checked or unchecked. Stuff like that.
Logged
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Epson 1430 with T-Rip
« Reply #6 on: June 28, 2014, 08:41:55 PM »
Call Scott for support. He'll have you sorted in no time.

Pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!
Pages: [1]   Go Up
« previous next »