Author Topic: Equipment Vids  (Read 1455 times)

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5320
Equipment Vids
« on: March 04, 2014, 02:13:57 PM »
I was trying to find some info and vids on the M&R CH3D which looks and sounds like a really nice press, yes I found some vids and info, but he who will not be mention had some vids also and I will say this about HWWNBM does a really nice job of explaining the product, of all the M&R presses I've seen I think this CH3D is very very nice you can just about stand in one spot and control the whole press this might be worth every penny, my hats off to Rich and his team at M&R but now do something with your vids LOL.

Darryl
« Last Edit: March 04, 2014, 04:32:45 PM by 3Deep »
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!


Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Equipment Vids
« Reply #1 on: March 04, 2014, 03:12:44 PM »
I was trying to find some info and vids on the M&R CH3D which looks and sounds like a really nice press, yes I found some vids and info, but he who will not be mention had some vids also and I will say this about HWWNBM does a really nice job of explaining the product, of all the M&R presses I've seen I think this CH3D is very very nice you can just about stand in one spot and control the whole press this might be worth every penny, my hats off to Rich and his team at M&R but now do some with your vids LOL.

Darryl

It is actually a pretty informative infomercial from a guy who now sells bed mattresses  ;D
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Equipment Vids
« Reply #2 on: March 04, 2014, 03:26:51 PM »
I say one of you guys with a new CHIIID complete the "Auto Wars" series on the forum here so we can all get a look!
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Equipment Vids
« Reply #3 on: March 04, 2014, 04:42:27 PM »
I looked for good vids a while back and there wasn't much.  There were a few mildly entertaining and informative videos but nothing like the very few vids some of us made for the auto wars threads.  I'd love to see some of the better and lesser known features of the Ch 3 and 3D but the videos out there are nice to look at but it's very "softcore" and I want hardcore screen print porn.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: Equipment Vids
« Reply #4 on: March 04, 2014, 07:34:30 PM »
I got my video camera on my desk at work for this very reason, I want to make a more informative video and I am going to, but as soon as my 3D got installed we got super busy and haven't slowed down a bit!  Its is in the works at my shop.  Coming Soon!
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: Equipment Vids
« Reply #5 on: March 04, 2014, 07:35:51 PM »
If we get time we will do a video of all the features.  But I can say this you can do about anything from the head or from the control panel. 
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Northland

  • Hero Member
  • *****
  • Posts: 621
Re: Equipment Vids
« Reply #6 on: March 04, 2014, 07:51:25 PM »
If we get time we will do a video of all the features.  But I can say this you can do about anything from the head or from the control panel.
Damn it feels good to be a gangsta...
Congrats !