Author Topic: making an underbase in CorelDraw X5...stroke size?  (Read 1548 times)

Offline Mark @ Hurricane Printing

  • Hero Member
  • *****
  • Posts: 567
making an underbase in CorelDraw X5...stroke size?
« on: December 11, 2013, 07:07:21 AM »
I have a simple one color design i am making an underbase for. It is an image and text....full back and left chest.

What size pen stroke should I use? I know a 2 point stroke is really 1 point taken out of the image?..Is that enough?...Should I do a 4 point stroke (i.e. 2 point stroke taken out the image).
Mark


Offline Doug B

  • !!!
  • Hero Member
  • *****
  • Posts: 547
Re: making an underbase in CorelDraw X5...stroke size?
« Reply #1 on: December 11, 2013, 07:26:02 AM »
  I usually use 1 point or hairline.

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: making an underbase in CorelDraw X5...stroke size?
« Reply #2 on: December 11, 2013, 08:35:08 AM »
I never go more than 1pt
"No man is an island"

Offline Stinkhorn Press

  • !!!
  • Hero Member
  • *****
  • Posts: 545
Re: making an underbase in CorelDraw X5...stroke size?
« Reply #3 on: December 11, 2013, 09:56:40 AM »
.75 pt consistently

1pt works but looks a little sloppy close up
4pt is monstrous!

hairline we find to be too little to be of any use (currently only using hairline to create a butt register gutter - i have my doubts that it's any different at all at the end of the dryer)

Offline Ryan

  • Sr. Member
  • ****
  • Posts: 447
Re: making an underbase in CorelDraw X5...stroke size?
« Reply #4 on: December 11, 2013, 10:10:48 AM »
.5-.75 usually for me unless it happens to be a large solid image then I bump it up to 1 pt

Offline jason-23

  • Hero Member
  • *****
  • Posts: 958
  • FONTNINJA
Re: making an underbase in CorelDraw X5...stroke size?
« Reply #5 on: December 11, 2013, 02:12:19 PM »
I find that .75 is perfect and covers the step down or thickness side edge of your unberbase perfectly.