« previous next »
Pages: [1]   Go Down

Author Topic: Polystretch White  (Read 2488 times)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Polystretch White
« on: July 29, 2011, 01:53:21 PM »
For tech garments. Wilflex Poly white w/ 7% HD Clear.
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Polystretch White
« Reply #1 on: July 29, 2011, 03:01:02 PM »
Does the HD make the ink little more printable?  I used it the other day on some jerseys and it was so smooth that it felt like it was heat pressed after printing.
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Polystretch White
« Reply #2 on: July 29, 2011, 03:02:47 PM »
Love that Poly white.
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Polystretch White
« Reply #3 on: July 29, 2011, 03:07:56 PM »
Yes the HD Clear increases flow properties. Also good for spandex/lycra blends. For cottons use the same ratio using any cotton white you prefer.
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Polystretch White
« Reply #4 on: July 29, 2011, 03:23:40 PM »
I like it too, I just wish it was a bit thinner.
Logged

Offline ErinAllenLamb

  • Verified/Junior
  • **
  • Posts: 74
Re: Polystretch White
« Reply #5 on: August 01, 2011, 10:59:53 AM »
My only warning with this mix, is that HD Clear doesn't have any bleed resistance in it. So, when you add, it actually reduces the bleed resistance of PolyWhite. 

If you want a stretchy polyester with a high level of bleed resistance, try Epic Peformance White.

To make PolyWhite a bit easier to print, reduce with Viscosity Buster. Only add 1 to 3% by weight and it will help with it's flow and will de tack the ink.

Erin
Logged
Pages: [1]   Go Up
« previous next »