« previous next »
Pages: [1]   Go Down

Author Topic: two layer magna discharge super white  (Read 1021 times)

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
two layer magna discharge super white
« on: November 20, 2013, 10:53:23 AM »
For better brightness we print two layer of magna super discharge white.  But washing failed. But i we print single layer the washing ok.  Is ther any help?
Logged

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: two layer magna discharge super white
« Reply #1 on: November 20, 2013, 11:44:43 AM »
Are you talking just a double stroke or a print, flash, print?  The DC whites don't accept other inks on top of them from the little bit of testing we've done.  It's not like printing on top of a plastisol underbase at all.
Logged
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline Parker 1

  • Sr. Member
  • ****
  • Posts: 473
Re: two layer magna discharge super white
« Reply #2 on: November 20, 2013, 11:53:32 AM »
Try using strait DC base or 80/20 mix for your first white, then print 100% white on top.  We have done this with good results.  Posted this pic last week in another thread, base was a DC 50/50 mix and the top was strait Dwhite. 
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4277
Re: two layer magna discharge super white
« Reply #3 on: November 20, 2013, 01:06:11 PM »
You're printing it like plastisol and not WB. You need to get it into the fabric and be able to see the ink inside the garment.
We're through the looking glass here people.
Logged
Pages: [1]   Go Up
« previous next »