Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
"He who marches out of step hears another drum." ~ Ken Kesey
Home
Forum
Help
Search
Gallery
Articles
Advertise
Login
Register
TSB
»
Embroidery
»
General Embroidery
»
3D puff help
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: 3D puff help (Read 2270 times)
cbjamel
Gonzo Member
Posts: 1093
3D puff help
«
on:
March 03, 2013, 06:38:16 PM »
>:(Would the 3D puff guru's look at this and tell me what I am doing wrong. using ackermann puff 3mm, is all puff the same or one better than another. Using swf 1201 and SEDS 7.1 software to digitize myself.
2nd color is puff white.
Thanks,
Shane
Logged
Audifox
Sr. Member
Posts: 388
Re: 3D puff help
«
Reply #1 on:
March 04, 2013, 02:32:13 PM »
The first thing I do see is the underlay for your puff. Way too much. Normally one column to tack down the puff.
What is your density set at for the puff? Can you post a pic of your sewout?
Logged
cbjamel
Gonzo Member
Posts: 1093
Re: 3D puff help
«
Reply #2 on:
March 04, 2013, 02:41:26 PM »
My density is .15mm to .10mm underlay is 30% set in with 1.2mm wide with .6 compensate. My normal is .20mm to .22mm.
Shane
Logged
Audifox
Sr. Member
Posts: 388
Re: 3D puff help
«
Reply #3 on:
March 04, 2013, 03:07:00 PM »
I did notice there is no capping on the ends of some of the parts of the design. I found a video that might help a little bit.
EOS Digitizing for Puff
In this video he shows capping on the ends of the P that he is working on.
He shows more tackdown than I would normally do.
Logged
cbjamel
Gonzo Member
Posts: 1093
Re: 3D puff help
«
Reply #4 on:
March 04, 2013, 03:12:12 PM »
There is no need for it, that I see. there is one 2 places maybe. Jaw line.
Shane
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
TSB
»
Embroidery
»
General Embroidery
»
3D puff help