Author Topic: Discharging Beefy T's (Read 1823 times)

cbjamel · « **on:** January 31, 2013, 02:07:51 PM »

Discharging Beefy T's is it possible??

Thanks,
Shane

ebscreen · « **Reply #1 on:** January 31, 2013, 02:10:28 PM »

Yes though we have had some bad luck in terms of some normally dischargeable colors (black etc.) not discharging correctly.
I only mention because it has happened more often with Beefy tee's than with say Gildan etc.

cbjamel · « **Reply #2 on:** January 31, 2013, 02:26:56 PM »

Thanks for FYI. Do appreciate.
Shane

blue moon · « **Reply #3 on:** January 31, 2013, 02:49:31 PM »

our last Golden Image winner was a DC underbase on the Beefy. It was a small run as we are just getting started with the discharge, but that one order was a killer!

pierre

ZooCity · « **Reply #4 on:** January 31, 2013, 03:53:34 PM »

We tested CCI D-White on like every dang Black T out there for a client and Beefy is pretty low on the totem pole. It worked but the others looked better. Could just be overdyed black shirts though I have not ran the beefy colors...or, come to think of it, the Nanos.

T Shirt Farmer · « **Reply #5 on:** January 31, 2013, 07:22:27 PM »

Did theses this morning... Beefy with 341 DC... why does my Iphone take such crappy pictures

ericheartsu · « **Reply #6 on:** January 31, 2013, 07:23:23 PM »

I've found Hanes tees in general dont look that great with White Discharge

screenprintguy · « **Reply #7 on:** January 31, 2013, 07:33:42 PM »

done lots of beefy t discharge base and full pigmented discharge prints and always come out nice and consistent, you are going to want to use lotso pressure discharge printing beefy though because there is so much fabric to cut into, I usually do a double stroke with about 40 psi on the auto to really drive the discharge in lots of angle as well say 156-230 mesh counts depending on the design.
Port and Co shirts though, are not so consistent on discharging, woooooooo no

cbjamel · « **Reply #8 on:** January 31, 2013, 09:27:53 PM »

Looking at do 4cp with discahrge white base. What do I need to know. Anything different.
As in discharge double storke flash and 4cp flash.Belt spped and temp for std minisprint 4-8-4.
What white is the best? CCI or ??

Thanks,
Shane

screenprintguy · « **Reply #9 on:** January 31, 2013, 09:35:52 PM »

We fell in love with cci white and base for discharge, but I've heard good things about sericol and rutland discharge as well.

tonypep · « **Reply #10 on:** February 04, 2013, 03:03:34 PM »

All of those are good products. Janzeten and Matsui also if you're on the West Coast. Once get beyond dabbling you'll find that discharge inks are far less finicky than plastisols

News:

Author Topic: Discharging Beefy T's (Read 1823 times)

cbjamel

Discharging Beefy T's

ebscreen

Re: Discharging Beefy T's

cbjamel

Re: Discharging Beefy T's

blue moon

Re: Discharging Beefy T's

ZooCity

Re: Discharging Beefy T's

T Shirt Farmer

Re: Discharging Beefy T's

ericheartsu

Re: Discharging Beefy T's

screenprintguy

Re: Discharging Beefy T's

cbjamel

Re: Discharging Beefy T's

screenprintguy

Re: Discharging Beefy T's

tonypep

Re: Discharging Beefy T's