Exhausting end of the dryer fumes

[screenxpress]

I made this out of nothing more than ductboard, A/C metallic tape, A/C sealer, flex tubing and a bathroom exhaust fan.

Basically it's just an inverted box that is about 6 inches larger than the dryer.  Sits about 4 inches above the dryer on 2 cross boards where I fastened about 3 blocks on each cross board to create small tunnel areas for air to flow up and out from all the sides to the flex tube from the top.

Lightweight and cost about $75 and it works nicely

[Sbrem]

Here's ours on our 60". The larger vent pipe on the left is not part of the hood; (that one is for the dryer exhaust itself.) There are 2 inline exhaust fans in the run...

Steve

[RICK STEFANICK]

Or this

NOW THATS SOUTH CAROLINA COUNTRY BOY ENGINEERING.. LOL

[tonypep]

That is how we roll down here in the Low Country Rick. I may be a Yank but my Maintenance guy is pure SC Country

[RICK STEFANICK]

I hear that. you may be a yank but your still a redneck yankee boy.country boy your born with, redneck is self inflicted.

[screenprintguy]

We need TSB to create a like button on posts, If there was one of those, I would have clicked it on the last two posts before this one. You guys rock!! Redneck Yanks, that's awesome