Ready to put frames to work, but have questions....

[ebscreen]

Taping over the chanels is fine, it's the hex parts (where the wrench goes) that you want to avoid, so you can retension later.

Degrease and dry before taping.



Sent from my ADR6300 using Tapatalk

[Denis Kolar]

Taping over the chanels is fine, it's the hex parts (where the wrench goes) that you want to avoid, so you can retension later.

Degrease and dry before taping.

That is what I thought. I did 6 of them last night like that. No tape over hex parts. I will have to double the tape at the square bar.

[sweetts]

I must be very lucky I only used packing tape on the edges but it sound like everyone else is using way beefier stuff, i have not popped a roller screen yet but sound like I should expect it. Dennis if its the blue tape I gave you it will come off in the dip tank. Not very sticky

Sent  from samsung gem(the worst smart phone ever)

[Denis Kolar]

I must be very lucky I only used packing tape on the edges but it sound like everyone else is using way beefier stuff, i have not popped a roller screen yet but sound like I should expect it. Dennis if its the blue tape I gave you it will come off in the dip tank. Not very sticky

Sent  from samsung gem(the worst smart phone ever)

I do not use dip-tank. Yes, it is that tape.

I'll see how long it will hul up like that.