Author Topic: Sleeve pallet sizing?  (Read 1190 times)

Offline broadway

  • !!!
  • Full Member
  • ***
  • Posts: 204
Sleeve pallet sizing?
« on: January 27, 2012, 12:53:29 PM »
   Looking to see what people are using for sleeve pallets for a M&R Diamondback? I  have a couple of different pieces hanging around. The first one is 6" by 22" which seems too big for size small long sleeve tee's, better suited for pants. The other is 4" by 22" which seems about right.  Pockets fit on the 4" pallet also. Does anyone print pockets this way? What do people do with the pallet arm brackets? They stick out at an angle making it hard to put on and remove long sleeve tee's. Does anyone use 2" tape to make it easier, so it does not get hung up?


Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Sleeve pallet sizing?
« Reply #1 on: January 27, 2012, 01:23:29 PM »
4" is perfect for sleeves on our press.  Smaller long sleeve shirts are harder to get on and off but they fit.  We also do pockets with them.  We will sometimes put some tape around the pallet camlocks because the sleeves can get caught on small and mediums, depends on how many smaller shirts are in the order.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Sleeve pallet sizing?
« Reply #2 on: January 27, 2012, 02:06:28 PM »
5 in here on our press.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: Sleeve pallet sizing?
« Reply #3 on: January 27, 2012, 02:12:34 PM »
I always tape up the brackets--but I yank too hard on the sleeves as a habit, which makes them much easier to snag even the larger sizes.  Too used to working under 'this afternoon' kind of deadlines.
I'd get 4" if I were getting more...

Anyone tried the dual sleeve style?  The shop we bought the Gauntlet from swears by them...  seems like it would be nice not having to screw around with loading over that bracket at all.

Offline broadway

  • !!!
  • Full Member
  • ***
  • Posts: 204
Re: Sleeve pallet sizing?
« Reply #4 on: January 28, 2012, 09:14:21 AM »
Thanks for the help.