Where to posoiton second flash?

[kidink]

Hi all,

When incorporating a black and top white screen into a simulated process print and with 2 spot cures, where is it best to position the second flash?

eg. (using a 10 color auto)

Base /FLASH/ Grey, Yellow, Red, Blue, Green, /FLASH/ Black, Top White ?

Would you position it before the black and top white in head 8 or after the black in head 9?

Thanks

[BP]

After the underbase then flash and all other colors wet on wet.

[Admiral]

If black and white are touching, after the black.

[brandon]

Assuming plastisol ink flashing the black will most likely give it a shine to it. If that is something you want to avoid a small amount of puff in the black will dull it.

[AntonySharples]

red should go last of your colors before flashing to avoid getting stepped on.  Depending on the art, we'll print hl white/black or vice versa.  No need to flash if you sep the art right.

[3Deep]

Every answer you get is going to be right, for that shop anyway, so the best answer to your question is what works in your shop, but you will get a bunch of good answers.

[kidink]

Thanks, i probably should have specified i was referring to a full simulated process print, 305 mesh as opposed to solid vector art.