« previous next »
Pages: [1]   Go Down

Author Topic: heat resistant glue for heat press  (Read 1014 times)

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6054
heat resistant glue for heat press
« on: June 04, 2020, 04:22:49 PM »
2 of my hat platens (Hotronix) have the rubber releasing, very very cleanly I might add. Can anybody recommend the right glue for the repair? Thanks in advance

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline BrazosDesigns

  • Full Member
  • ***
  • Posts: 132
Re: heat resistant glue for heat press
« Reply #1 on: June 04, 2020, 06:53:47 PM »
3M 1357.  This is also the adhesive to use when glueing on new pallet rubber.  It ain't cheap, but it works!

https://www.grainger.com/product/5E130?gclid=CjwKCAjwt-L2BRA_EiwAacX32a_jnBsN2x5CgBq5qklPnrSg4YrW5P5VYz8ryylkvApZWJ_DFaau8hoCG2YQAvD_BwE&cm_mmc=PPC:+Google+PLA&ef_id=CjwKCAjwt-L2BRA_EiwAacX32a_jnBsN2x5CgBq5qklPnrSg4YrW5P5VYz8ryylkvApZWJ_DFaau8hoCG2YQAvD_BwE:G:s&s_kwcid=AL!2966!3!264955915658!!!g!438381471565!

I have used Weldwood contact cement (from Lowe's / Home Depot) for glueing rubber onto wood pallets years ago and never had any issues even with lots of flashing.  If it were me and I didn't have any 3m 1357, I'd try the Weldwood first, and if that didn't work, go to the 3M 1357.

Hope this helps...
Darren
Logged
Pages: [1]   Go Up
« previous next »