« previous next »
Pages: [1]   Go Down

Author Topic: What would cause this?  (Read 2173 times)

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
What would cause this?
« on: August 14, 2019, 12:20:13 PM »
I know this has been covered before, but Im just looking for some more insight.  What could we do to prevent this?  Most of our jobs come through, and we don't have a issue, or if there is normal wear and eventual cracking on a print, most people understand its the nature of the printing process.

But this is a shirt we printed over a year ago for a basketball team.  Just looking to not do what we did before.

Underbase - Rutland Premier White
Top colors - Rutland M3

Is this over flashing?

Thanks!
Logged

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: What would cause this?
« Reply #1 on: August 14, 2019, 01:35:16 PM »
That looks like long term abrasion to me.  But...

There are a couple spots where - maybe - some undercure.  But its hard to see 100%. 

Is the ink rubbing off all the way to the shirt?  Stretch test?
« Last Edit: August 14, 2019, 01:37:47 PM by Colin »
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1093
Re: What would cause this?
« Reply #2 on: August 14, 2019, 01:54:18 PM »
the colors are touching the white screen and kissing it, tension or off contact.
Shane
Logged

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3205
Re: What would cause this?
« Reply #3 on: August 14, 2019, 02:23:02 PM »
I'd say over flash.
Logged
...keep doing what you're doing, you'll only get what you've got...

Offline BP

  • Sr. Member
  • ****
  • Posts: 380
Re: What would cause this?
« Reply #4 on: August 14, 2019, 02:39:20 PM »
Looks to be over cured.
Logged
SHIRT HAPPENS!

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: What would cause this?
« Reply #5 on: August 14, 2019, 03:21:21 PM »
I'll join the over-flashed group.

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: What would cause this?
« Reply #6 on: August 14, 2019, 03:52:24 PM »
I am in the over flash group also. Just wondering though why you would under base the black? 
Logged
Specializing in shop assessment's, flow and efficiency

Offline sportsshoppe

  • !!!
  • Hero Member
  • *****
  • Posts: 649
  • A way of life.
Re: What would cause this?
« Reply #7 on: August 14, 2019, 04:09:10 PM »
Logged

Offline Orion

  • !!!
  • Hero Member
  • *****
  • Posts: 764
  • Ain't no shortcuts in screen printing.
Re: What would cause this?
« Reply #8 on: August 14, 2019, 05:10:38 PM »
Looks as if there is some issue with the white in the beak. If you used only one white your problem is not overflash delamination it is undercure.
Logged
Dale Hoyal

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: What would cause this?
« Reply #9 on: August 16, 2019, 02:00:40 PM »
Quote from: RICK STEFANICK on August 14, 2019, 03:52:24 PM
I am in the over flash group also. Just wondering though why you would under base the black?

Sorry, Im just getting back to this topic.  My guess was that it got overflashed.  OK So we underused the navy blue because this particular design went on 6 different color shirts. White, light blue, orange, tan, Dark Grey, and Navy (go Figure) and the coach was adamant about the colors all being consistent between each shirt color.  Thats why we did a underboss under the navy.  Also, they didn't want to pay for multiple setups/screens on the base.

OK.  We are reprinting this again this year, and will try and keep the flashes down better.

Thank you everyone!
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: What would cause this?
« Reply #10 on: August 17, 2019, 02:03:32 PM »
Pretty certain it is undercure rather than an over. Rick Roth has done extensive testing and shown that ubase overcure seems to be a myth. I tend to agree as with all the shirts we use for testing and print over the previous prints there are never any issues with adhesion. I am willing to bet $100 overflashing is not the problem. Any takers?

Make sure its cured when going through the dryer!
Pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: What would cause this?
« Reply #11 on: August 17, 2019, 03:40:43 PM »
Quote from: blue moon on August 17, 2019, 02:03:32 PM
Pretty certain it is undercure rather than an over. Rick Roth has done extensive testing and shown that ubase overcure seems to be a myth.
Pierre

I know that over the years, I have been asked to print over an existing print, for one reason or another, and did not have an adhesion problem.

That said, I have also seen ink, especially whites start to wear and crack prematurely from over curing.
Logged
That rug really tied the room together, did it not?

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: What would cause this?
« Reply #12 on: August 17, 2019, 04:54:31 PM »
Many, many things.
Logged

Offline Lizard

  • Sr. Member
  • ****
  • Posts: 306
Re: What would cause this?
« Reply #13 on: August 17, 2019, 08:27:50 PM »
If you are getting M3 navy to print that opaque on top of a base you are putting down a whole lot of ink.  The print needs a lot more cure time.  Other than that it's a pretty nice distress print.
Logged
Toby
 Shirt Lizard Charlotte, NC 704-521-5225

Offline Ross_S

  • Sr. Member
  • ****
  • Posts: 349
Re: What would cause this?
« Reply #14 on: August 18, 2019, 11:03:42 AM »
Under Cured for sure I agree with Pierre on this.  Plus navy, royal, purple etc have horrible wetting properties (Adhesion to the base) when underbasing and tend to do this.  However, the yellow is wearing off and thats the sign it's undercured.

I'm also guessing that you print flash printed the base before the top colors and that will create the issues with your navy (I'm guessing you did this)
Logged
Pages: [1]   Go Up
« previous next »