Complete Manual Screenprinting ShopVastex HD2000 8/4 Press
AmerGraph 150 1200W Exposure Unit w/extra bulb
CAPS Conveyor Dryer - 20” belt - 240v
Vastex 18” x 24” Flash Dryer on HD base - 240v
Newman RollerMaster LX Table w/small compressor
Screen Drying Cabinet
Light Table - all metal with a tilting top
Graphtec CE3000-60 24” Vinyl Cutter w/floor stand
Washout Sink
Roller Frames - 18” x 20” - 52
Roller Frames - 23” x 26” - 2
Roller Frames - 23” x 26” (Old Composite Corner) - 4
Newman Tension Meter - older 40nm model - factory recalibrated
Static Aluminum Frames 20” x 24” - 8
Squeegees - 14 aluminum handled w/70/90/70 blades
Four 12”, four 14”, three 6”, three 8”
Hix Hat Heat Press - 120v
Hix Heat Press - 16” x 20” - 120v
TOTAL: $ 9800.00All equipment is clean.
Aerosol spray tac was never used on this press. Original 6-color, 4-position hubs are included,
along with the factory jig to set up as all-heads-down upon reassembly. Press breaks down and assembles with a 9/16” socket.
4 - 15” x 17” standard pallets, 1 youth pallet, 1 pocket/sleeve pallet, 1 long sleeve pallet,
2 pallet hardware assemblies for making your own custom pallets included
Dryer belt is clean with no holes or tears.
Exposure unit is clean with no holes or tears in the blanket. Brand new replacement bulb included.
All Frames are clean with mesh. A few have a small hole repaired with super glue and hold tension.
A handful of Shur-loc mesh panels and some bolt mesh is included, along with retention strips for retensionable frames.
Tension meter was recalibrated at the factory and comes in the case with the calibration glass.
Selling all equipment as a package.This is an ideal opportunity for someone who has started out with entry-level equipment and is ready to step up to good used professional-level equipment that has been maintained, isn’t covered with ink and filth, at a very good price.
Pick-up in Orlando, Florida only.
I'll entertain all offers, but for the time being I'd like to sell this as a package. You can email me if there are single pieces you're interested in should I end up breaking the stuff up, and I'll keep your email to contact later if that becomes the case.
Contact me by email with questions and offers at:
tpitman@pitmangraphics.com
