films leaving printer ink on screens

[ebscreen]

for a screen storage room (coated, ready to burn) what are the desired TEMP and HUMIDITY?

Check the datasheet for your emulsion. We have dehumidifier kick on over %40 and heater kick on under 80f.
Right now we could probably use a humidifier. SP-1400, right now the winter version.


https://tkkrlab.nl/wiki/Arduino_KY-015_Temperature_and_humidity_sensor_module

What we used, and if they ain't lying it's pretty good specs.

[Dottonedan]

I was told
Temp between 72-80
Humidity under 40.

This seems pretty good for most all.  I've seen shops down to 30-35% that worked well and had even seen shops up at 45-55% that worked well, but they are not the norm. I've seen one dryer cabinet that was being kept at 140 or more degrees. That's way way too hot and works against the screen. Bakes them rather than drying them. The room temp is not (as important) as keeping the humidity down). I've been in some rooms that were 60-65 degrees in winter but as long as you are drawing the humidity out, it's ok.

[Hey Monkey]

Baby Powder. Problem solved. Works wonders for me and now everything smells awesome

[screenxpress]

Baby Powder. Problem solved. Works wonders for me and now everything smells awesome

Not to mention it can pull double duty if ya get chaffed running between the press and dryer