« previous next »
Pages: [1]   Go Down

Author Topic: soft ink on a 50/50 fleece  (Read 2091 times)

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
soft ink on a 50/50 fleece
« on: October 17, 2011, 05:13:47 PM »
I have a customer with a pita request , very soft print on a 50/50 hoodie ofcourse the print has to be bright and opake but with no feel.

Black hoodie golden yellow and white print.

Ideas? 50/50 so discharge is out , waterbase means I have to buy new inks for a small run, thinning down my inks will make them less opake... I'm at a loss on this one.
Logged

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: soft ink on a 50/50 fleece
« Reply #1 on: October 17, 2011, 05:17:38 PM »
Transfers?
Logged

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3208
Re: soft ink on a 50/50 fleece
« Reply #2 on: October 17, 2011, 05:18:43 PM »
HAHAHAHAHAH. . . . FAIL. . .fk your customers man. . . . . I want, want, want and I want it cheaper than the other guy. . .dude, there are easier ways to make money. . .damn I hate Rochester. . .
Logged
...keep doing what you're doing, you'll only get what you've got...

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: soft ink on a 50/50 fleece
« Reply #3 on: October 17, 2011, 05:24:16 PM »
Quote from: Homer on October 17, 2011, 05:18:43 PM
HAHAHAHAHAH. . . . FAIL. . .fk your customers man. . . . . I want, want, want and I want it cheaper than the other guy. . .dude, there are easier ways to make money. . .damn I hate Rochester. . .

Effin' hipster fashion types .... think I just puked in my mouth alittle.
Logged

Offline Nation03

  • Gonzo Member
  • ******
  • Posts: 1259
  • The Dude abides.
Re: soft ink on a 50/50 fleece
« Reply #4 on: October 17, 2011, 05:40:11 PM »
Don't know if this has been tried before, but maybe do a discharge base so it lightens the fabric up somewhat, then do a plastisol white over the discharge base. I know 50/50's don't discharge all the way, but I'm curious to see the results.
Logged

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: soft ink on a 50/50 fleece
« Reply #5 on: October 17, 2011, 05:46:17 PM »
I understand the soft print on a tight fitting shirt but on fleece you cant feel the print against your body so why does it matter?
Logged

Offline Nation03

  • Gonzo Member
  • ******
  • Posts: 1259
  • The Dude abides.
Re: soft ink on a 50/50 fleece
« Reply #6 on: October 17, 2011, 05:50:15 PM »
Good point. People just like being a pita for the fun of it I guess. The softest prints I've gotten on a hoodie were with IC white ink through a 156 mesh I believe. Still had somewhat of a hand but it was a super smooth print.
Logged

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: soft ink on a 50/50 fleece
« Reply #7 on: October 17, 2011, 05:57:22 PM »
Stupid question but  90/10  fleece is that a 100% cotton shell and poly inside? I can get away with a standard white correct? I always used 50/50 ink just incase. They just might have to upgrade to a more expensive hoodie.
Logged

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: soft ink on a 50/50 fleece
« Reply #8 on: October 17, 2011, 05:59:01 PM »
Quote from: Nation03 on October 17, 2011, 05:50:15 PM
Good point. People just like being a pita for the fun of it I guess. The softest prints I've gotten on a hoodie were with IC white ink through a 156 mesh I believe. Still had somewhat of a hand but it was a super smooth print.

Which IC white? I have 7031 and 714LF
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: soft ink on a 50/50 fleece
« Reply #9 on: October 17, 2011, 06:20:27 PM »
I generally don't tend to worry about 90/10 bleeding if it's black, and they will typically
discharge pretty well.

The tultex/Independent have a cotton face to discharge, though both have failed on me
at one point or another.

Poly and soft print are mutually exclusive as far as I'm concerned. Smooth yes, soft hand no.

Logged

Offline Nation03

  • Gonzo Member
  • ******
  • Posts: 1259
  • The Dude abides.
Re: soft ink on a 50/50 fleece
« Reply #10 on: October 17, 2011, 08:59:22 PM »
Quote from: endless ink printing on October 17, 2011, 05:59:01 PM
Quote from: Nation03 on October 17, 2011, 05:50:15 PM
Good point. People just like being a pita for the fun of it I guess. The softest prints I've gotten on a hoodie were with IC white ink through a 156 mesh I believe. Still had somewhat of a hand but it was a super smooth print.

Which IC white? I have 7031 and 714LF

54D-16CP I think it was the Ryonet White.. Not huge on that company but the white was pretty nice, but it tends to have an inconsistent body. I'm just about finished with a 5 gallon bucket of QCM 158 and didn't mind it but I think I'm going to go back to Buffalo white.
Logged
Pages: [1]   Go Up
« previous next »