« previous next »
Pages: [1]   Go Down

Author Topic: New Guy  (Read 1218 times)

Offline Magick

  • Newbie
  • *
  • Posts: 4
New Guy
« on: November 13, 2015, 08:11:57 AM »
Hello everyone, been doing sublimation and found I had to get into screen printing to satisfy some of the things I needed to do. So......a few months ago I did just that, bit the bullet, went to Ryonet and spent my allowance on equipment and here I am. Been on a different forum for a few months now and stumbled onto this one and have seen a lot of useful info.
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7813
Re: New Guy
« Reply #1 on: November 13, 2015, 08:17:01 AM »
What kind of setup are you running?

This place is loaded with good info.
Logged

Offline Magick

  • Newbie
  • *
  • Posts: 4
Re: New Guy
« Reply #2 on: November 13, 2015, 09:54:19 AM »
6 color 2 station as that's the only one that fits in my basement, Ryonet's 8 bulb 25 X 36 exposure unit, Vastex 1000 conveyor dryer and a backlit washout booth I got off ebay....for inks I have a few colors of Ryopaque and a Wilflex pantone mixing system
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13969
  • Docendo discimus
Re: New Guy
« Reply #3 on: November 13, 2015, 10:05:07 AM »
Glad you found us, and hope that you'll be glad as well.
Logged
That rug really tied the room together, did it not?

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7813
Re: New Guy
« Reply #4 on: November 13, 2015, 12:45:08 PM »
great, you should have no problem getting going with that.

Glad you're here.
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6364
Re: New Guy
« Reply #5 on: November 13, 2015, 01:56:28 PM »
Welcome aboard!

Pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!
Pages: [1]   Go Up
« previous next »