Author Topic: Jacket hold downs... which ones are worth considering?  (Read 786 times)

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Jacket hold downs... which ones are worth considering?
« on: October 23, 2015, 02:49:45 PM »
we have an order coming up in the next few weeks that's for those 2 layer windbreaker type shirts that would require a jacket hold down clamp to print successfully...

Anybody have any suggestions of which jacket hold down to buy?  I see that M&R has them listed, as well as action. 

Anybody have a used one that they'd like to part with?

Thanks!
-J


Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6054
Re: Jacket hold downs... which ones are worth considering?
« Reply #1 on: October 23, 2015, 03:10:23 PM »
We use the Livingston...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Jacket hold downs... which ones are worth considering?
« Reply #2 on: October 23, 2015, 06:52:58 PM »
Not sure if you are manual or auto here is what we built for our manual press.
mooseman
http://www.theshirtboard.com/index.php/topic,4888.msg54250.html#msg54250
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline fraelichb

  • Newbie
  • *
  • Posts: 3
Re: Jacket hold downs... which ones are worth considering?
« Reply #3 on: October 25, 2015, 06:19:36 PM »
I use a Livingston.


Sent from my iPhone using Tapatalk