Author Topic: Ink for Electric Utility company workers  (Read 2180 times)

Offline Tag1

  • Newbie
  • *
  • Posts: 6
Ink for Electric Utility company workers
« on: September 02, 2015, 09:27:45 PM »
I have an electric company wanting shirts but they say it has to be DGI or water based inks because Plastisol inks will burn if the worker comes into contact with electricity.  Has anyone heard of this before?  Is this true?


Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Ink for Electric Utility company workers
« Reply #1 on: September 02, 2015, 09:37:20 PM »
We print for smokejumpers, wildland firefighters and the like and some can't wear blends under their gear if I recall.  Same concern more or less- melting.

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Ink for Electric Utility company workers
« Reply #2 on: September 02, 2015, 11:40:37 PM »
I was a Wlidland Firefighter for years on a Hotshot crew and we wore plastisol on our crew shirts. We wore Flexfit cotton poly caps as well. Who know whether or not the thread was fire resistant. The Nomex that we wore was not to protect from heat but just to keep us from catching our clothes on fire. The cloth for the pants and shirts was thinner thinner than a 5oz tee. What did suck was when the print covered a large area and it was annoying having a patch on your back underneath your fire shirt and pack in 105 degree weather while on a fire.

We have printed for a local utility and had to use waterbase as well. Kind of silly really when your hit with that kind of voltage the last thing your worrying about is whether or not the ink is flammable or conductive.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7851
Re: Ink for Electric Utility company workers
« Reply #3 on: September 03, 2015, 10:51:40 AM »
i've never heard of this either and I know the local power company uses plastisol, we've printed some for them.

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6054
Re: Ink for Electric Utility company workers
« Reply #4 on: September 03, 2015, 11:53:42 AM »
i've never heard of this either and I know the local power company uses plastisol, we've printed some for them.

Yeah, who's worried about the ink. I can understand not using poly shirts because if they melt, it's directly onto the skin. But the ink? Play it safe and go WB...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline GKitson

  • Hero Member
  • *****
  • Posts: 720
  • Just another t-shirt guy
Re: Ink for Electric Utility company workers
« Reply #5 on: September 03, 2015, 12:59:39 PM »
Some years ago we did a lot of printing for the local Air National Guard unit and their direction to us regarding the mil spec was that if the guy/gal wore a 'bag' (a flight suit) all undergarments had to be 100% cotton with no 'plastic' heavy handed inks.

This also applied to some flight line crew depending on job responsibilities and all designated fire fighting personnel.

Therefore in order to make sure of compliance if the order was an official military PO we had to comply with those guidelines,  However if a bunch of guys simply ordered some 'cool looking' shirts and paid for them outside of channels pretty much anything was allowed.

~Kitson
Greg Kitson
Mind's Eye Graphics Inc.
260-724-2050

Offline Rob Coleman

  • Sr. Member
  • ****
  • Posts: 359
Re: Ink for Electric Utility company workers
« Reply #6 on: September 03, 2015, 02:04:33 PM »
i've never heard of this either and I know the local power company uses plastisol, we've printed some for them.

Yeah, who's worried about the ink. I can understand not using poly shirts because if they melt, it's directly onto the skin. But the ink? Play it safe and go WB...

Steve

Off topic a bit but this is interesting about the "melting" part.  Do you know why children pajamas are 100% polyester -- because they pass the char test required for flammability of fabric for sleepwear.  Basically you hold a flame to the material suspended vertically for a small period of time (3 seconds?); you then measure the length of time it takes to self extinguish as well as the char length.  Polys meet the standards since the extinguish rather quickly, while cotton does not (burns longer).

So, I guess it is better to melt your baby then burn your baby! 

ps inks for printing on these type of materials must FR as well - printed on fabric and same test performed.
Rob Coleman | Vice President
Textile Business Unit | Nazdar SourceOne | sourceone.nazdar.com
(800) 677-4657 ext. 3708 | Cell (678) 230-4463
rcoleman@nazdar.com

Offline Squeegie

  • !!!
  • Full Member
  • ***
  • Posts: 177
Re: Ink for Electric Utility company workers
« Reply #7 on: September 03, 2015, 02:30:58 PM »
We have a couple of clients that are welders.
They only want 100% cotton shirts as any sparks that hit the shirt will burn through it instead of melting to the skin.  There words, not mine.
They have had no concern about the ink just the fabric...go figure.

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5675
Re: Ink for Electric Utility company workers
« Reply #8 on: September 03, 2015, 02:39:59 PM »
I've told the story of how I was depositioned in a case where a young girl; wearing her fathers oversized shirt, reached over a candle and shirt caught on fire. The candle company got the major whack but we were held partly responsible although it was proven that the print was indeed water based.