Author Topic: Badger Camo Tees  (Read 3735 times)

Offline Robert Clark

  • Full Member
  • ***
  • Posts: 114
Badger Camo Tees
« on: January 23, 2017, 09:26:23 AM »
Hi Everybody,

 Just wanted to post some pics of our testing on the Badger Camo shirts.

Printing Steps

ELT DIGITAL BLACK –PFP 11O MESH
ELT-S WHITE- PFP 11O MESH
CURED OUT AT 290

The prints have held up very strong over the weekend and after 3 washes. A nice smooth print that lays flat on the shirt.

Get ready to see a lot of these with the upcoming baseball season quickly approaching.

Just let us know if you have any questions.

 

Robert Clark
One Stroke Inks
Senior Account Manager
rclark@osinks.com
(800)942-4447


Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6054
Re: Badger Camo Tees
« Reply #1 on: January 23, 2017, 10:13:51 AM »
those look good, especially on the Badger, pretty bad bleeders. Did you test with single hits of black and white as well and it just didn't quite work?

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Robert Clark

  • Full Member
  • ***
  • Posts: 114
Re: Badger Camo Tees
« Reply #2 on: January 23, 2017, 10:21:43 AM »
We did test with one hit of each .. Did not turn well. But even with 4 hits (2 black, 2 white ) on the shirt. It turned out a very lightweight print with a nice matte finish.
Robert Clark
One Stroke Inks
Senior Account Manager
rclark@osinks.com
(800)942-4447