Author Topic: Print run on Diamondback  (Read 868 times)

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 621
Print run on Diamondback
« on: July 29, 2015, 05:36:20 PM »
When running a large pfp job (print head 1, flash on 2 and print head 6) I'm at the mercy of the flash for how fast I can print. I've been using the Revolver mode to trick it into keeping the flash parked over the platen so I don't have the wait time of the flash shuttling back and forth. Is there a better way to do this?
Tees and Coffee


Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: Print run on Diamondback
« Reply #1 on: July 29, 2015, 06:14:46 PM »
When running a large pfp job (print head 1, flash on 2 and print head 6) I'm at the mercy of the flash for how fast I can print. I've been using the Revolver mode to trick it into keeping the flash parked over the platen so I don't have the wait time of the flash shuttling back and forth. Is there a better way to do this?
You do not have to do this. Contact our service department ,have your serial number ready and they will tell you how to put the head in flash mode.
Rich Hoffman

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 621
Re: Print run on Diamondback
« Reply #2 on: July 30, 2015, 08:43:56 AM »
Rich,

I found it in the manual. Not sure how I  missed it.
Tees and Coffee