« previous next »
Pages: [1]   Go Down

Author Topic: Need help with a file  (Read 2091 times)

Offline Ryan

  • Sr. Member
  • ****
  • Posts: 447
Need help with a file
« on: May 30, 2015, 09:27:11 AM »
I've had this logo digitized/edited by 3 different sources and I still think it looks....ehhh. Anyone here that is good with small lettering and would like to take a look at the file and give me a price to edit/fix it? Or am I over thinking this and this is fine? This is 2 different edits/files shown.
« Last Edit: May 30, 2015, 09:36:21 AM by Ryan »
Logged

Offline lrsbranding

  • Verified/Junior
  • **
  • Posts: 95
Re: Need help with a file
« Reply #1 on: May 30, 2015, 10:28:07 AM »
It could use a little lovin but it really depends on just how small it is. Are you using 60wt for the Mechanical Contractors? Did the digitizers give you an EMB file?
Logged

Offline broadway

  • !!!
  • Full Member
  • ***
  • Posts: 204
Re: Need help with a file
« Reply #2 on: May 30, 2015, 10:42:13 AM »
I am no embroiderer. I would start by making it bigger if you can. Try stacking the smallest type on top of each other. Quater inch high type? Show these finished samples  to the customer and also show him your new version with bigger type. Tell him for best results...
Logged

Offline Ryan

  • Sr. Member
  • ****
  • Posts: 447
Re: Need help with a file
« Reply #3 on: May 30, 2015, 11:33:05 AM »
40 weight and I am matching what was already done. I went to a smaller needle which seems to help quite a bit. Still a work in progress but I think its going to get me to where I feel alright about it.
thanks
Logged

Offline lrsbranding

  • Verified/Junior
  • **
  • Posts: 95
Re: Need help with a file
« Reply #4 on: May 30, 2015, 12:03:58 PM »
Good deal. If you can't get it where you need it let me know. I'll take a look. I'd prefer it in an EMB file if you have it.
Logged

Offline ftembroidery

  • !!!
  • Full Member
  • ***
  • Posts: 233
  • Just got new glasses, but I'm still disillusioned
Re: Need help with a file
« Reply #5 on: May 30, 2015, 12:46:50 PM »
I recommend you have it digitized for 60W on the small letters using a 65/9 needle or even 75W with a density of 2.0 using a 60/8 needle.  Also increase your backing and use a topping (ie. Solvey).
Logged
Grant me the ability to change the things I can, the strength to accept the things I cannot and the wisdom to recognize the difference.

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Need help with a file
« Reply #6 on: May 30, 2015, 12:50:34 PM »
Those letters on that type fabric will be a problem no matter what you do...but
try doubling up on the backing 2 layers,
use solvy if you have it.
The best fix would be to change the text to a micro block style, those super thin columns will always dive into the fabric. You have to understand that you are trying to lay a thread between two needle holes that are most likely intersecting each other. The result is the thread has nothing or very little to rest upon so it either dives in or disappears all together.

I think you are chasing a ghost on this .
mooseman   
Logged
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline bj

  • !!!
  • Full Member
  • ***
  • Posts: 204
Re: Need help with a file
« Reply #7 on: June 29, 2015, 09:31:43 PM »
Agree with Mooseman ;)
Solvy often is the answer, so that the thread stays on top.
If you want, I can take a stab at it....

Sincerely,
BJ

Logged

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Need help with a file
« Reply #8 on: June 30, 2015, 07:22:17 AM »
BTW, you need a new digitizer. Even the top letters are ....ehhhhh. :)

Thinner thread with thinner needle for the smaller one like mentioned before. You never said how tall it is.
Logged
Pages: [1]   Go Up
« previous next »