M3 Panel on MZX Frame

[sqslabs]

I mistakenly ordered a few M3 panels and stretched them on MZX frames before I realized what they were.  I figured this may affect the sweet spot of the screen but am not seeing much of a difference between these and my bolt mesh screens when measuring tension in different areas.  Is there a major downside to mismatching panels/frames?

[alan802]

There was a big argument/debate over this a while ago.  I know I've put MZX panels on M3 frames and others have done the opposite with no issues.  I know there will be a little discrepancy in the corner softening between the two frame types but as long as you're not pushing the limits on tension then I don't see it being a problem.

[DannyGruninger]

99% of the frames in my shop are 23x31 MZX...... But probably 50% are stretched with "m3" panels and we've never had any issues at all......

[jsheridan]

The M3 panels will fit into the MZX, the corners will be sloppy but OK

It's the mzx panels that don't fit to well into the m3 frames.

[sqslabs]

Thanks guys..   

[screenprintguy]

hrm nice to know