Author Topic: Another black Ink question  (Read 4214 times)

Offline abchung

  • !!!
  • Sr. Member
  • ****
  • Posts: 481
Re: Another black Ink question
« Reply #15 on: June 12, 2014, 12:05:22 AM »
I've did designs where I needed to print the black early in the print order and for some reason it builds up on the other screens very fast and starts ghosting and making a mess if I don't clean the bottom of the screen every so many prints.  This only happens with black ink, I use WM plastics black cream, anyone had this this problem, could be my mesh ct? it's done it with 137 and 230's.

Darryl

I am going to take a stab in the dark.
Have you guys tried 305/34 (305 s-thread)?


Offline KevWilso

  • Full Member
  • ***
  • Posts: 203
Re: Another black Ink question
« Reply #16 on: June 12, 2014, 12:21:29 AM »
I've did designs where I needed to print the black early in the print order and for some reason it builds up on the other screens very fast and starts ghosting and making a mess if I don't clean the bottom of the screen every so many prints.  This only happens with black ink, I use WM plastics black cream, anyone had this this problem, could be my mesh ct? it's done it with 137 and 230's.

Darryl

I am going to take a stab in the dark.
Have you guys tried 305/34 (305 s-thread)?

Going to guess no.
Kevin Wilson
River City Graphic Supply 512-454-0505 www.rivercitygraphicsupply.com