Author Topic: Ok how about "temp guns"??  (Read 1386 times)

Offline Rocfrog

  • Sr. Member
  • ****
  • Posts: 273
Ok how about "temp guns"??
« on: June 05, 2014, 12:35:10 PM »
Whats everyone using for Temp guns to check shirt temps while they are in the dryer??

Nick


Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Ok how about "temp guns"??
« Reply #1 on: June 05, 2014, 12:53:22 PM »
Donut probe. But we have a temp gun for other things.

Offline kirkage

  • Verified/Junior
  • **
  • Posts: 82
Re: Ok how about "temp guns"??
« Reply #2 on: June 05, 2014, 01:07:16 PM »
I use a temp gun from lowes to check the temp as the shirts are at their peak towards the back of the dryer. Since its a reflected heat I allow the temp to reach 375 before I consider it cured. That is based upon experience over the long haul where the ink pulls apart (not bridging) and red ink rubbing off (crocking). That's just how I do it.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Ok how about "temp guns"??
« Reply #3 on: June 05, 2014, 02:43:07 PM »
I get my most accurate readings just before they exit. That also allows me to hold the gun closer which is more accurate as well.
I also shoot for something between 375 and 400 just for an instant


Sent from my iPhone using Tapatalk
« Last Edit: June 05, 2014, 03:12:58 PM by Frog »
That rug really tied the room together, did it not?

Offline Rocfrog

  • Sr. Member
  • ****
  • Posts: 273
Re: Ok how about "temp guns"??
« Reply #4 on: June 05, 2014, 02:48:20 PM »
We are looking at this one or the next model closest to it....

http://www.milwaukeetool.com/instruments/temperature-meters/2265-20nst

Nick

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: Ok how about "temp guns"??
« Reply #5 on: June 05, 2014, 02:55:11 PM »
I use a donut probe inside the shirt... if the inside of the shirt is at 320 under the ink, I'm pretty sure that the shirt is completely cooked :)

Offline Rocfrog

  • Sr. Member
  • ****
  • Posts: 273
Re: Ok how about "temp guns"??
« Reply #6 on: June 05, 2014, 04:15:38 PM »
We have a "donut" but he says it doesn't work quite right. So we use a cheaper temp gun but it's pretty old and beat up.





Here is a pic of the donut

Nick


Sent from my iPhone using Tapatalk

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Ok how about "temp guns"??
« Reply #7 on: June 05, 2014, 06:31:40 PM »
We have a "donut" but he says it doesn't work quite right. So we use a cheaper temp gun but it's pretty old and beat up.

The cross hair where the two wires meet, need to be IN the ink to get accurate readings.
If you just place it atop a printed shirt, it won't read correctly.

Dab some ink on a shirt, then place the cross hairs in that blob and send it down.
Blacktop Graphics Screenprinting and Consulting Services

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Ok how about "temp guns"??
« Reply #8 on: June 05, 2014, 07:54:42 PM »
we have a fluke, really we do test our temps on a Fluke..... works pretty well.
http://www.amazon.com/s/?ie=UTF8&keywords=fluke+mini+62&tag=googhydr-20&index=aps&hvadid=31596547037&hvpos=1t3&hvexid=&hvnetw=g&hvrand=15014966911045557493&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_8zvsl6mzkd_b
There are cheaper guns out there but this is a pretty important element to the sure cure thing.
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.