Author Topic: carding screens  (Read 3348 times)

Offline Appstro

  • Full Member
  • ***
  • Posts: 183
carding screens
« on: May 11, 2014, 01:00:22 PM »
What is your technique to removing ink efficiently and cleanly from the screen? I am using two cards and kind of scooping them together and scraping into the ink container.


Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 985
Re: carding screens
« Reply #1 on: May 11, 2014, 01:04:49 PM »
I use the inks scoop most of the time. Sometimes I will use a business card too.
When you dig grave will you make it shallow so that I can feel the rain?

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: carding screens
« Reply #2 on: May 11, 2014, 01:17:57 PM »
Ink knives/cake spatulas
That rug really tied the room together, did it not?

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: carding screens
« Reply #3 on: May 11, 2014, 02:09:58 PM »
Ink knives/cake spatulas

We use these too. Love them for getting all the ink off & mixing ink. The goop scoop is what we use for a lot of ink.

Murphy37


Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: carding screens
« Reply #4 on: May 11, 2014, 02:14:31 PM »
same here...

picked up a dozen from a restaurant supply place for like $2 each.

-J

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: carding screens
« Reply #5 on: May 11, 2014, 02:15:30 PM »
For carding off ink back into buckets we cut up cardboard soda boxes etc that everyone brings in. We put them in the carts and around the press as we use them during runs to card ink back into the image area. Once we are done we just trash them but I feel this saves us lots of time/money then having something we have to clean. As for going from bucket to screen or mixing inks we use the smaller metal blade/wood handle dollar store blades. They work perfect, last a long time, easy to clean and a dollar each. As far as technique going back into bucket we stand screen up almost 90 degrees and take one of the cardboard soda box scraps(we cut them in squares about 3x3) and just card the ink on then scrape into bucket then discard cardboard.Pretty simple and works well for us.
« Last Edit: May 11, 2014, 02:19:54 PM by DannyGruninger »
Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: carding screens
« Reply #6 on: May 11, 2014, 03:23:22 PM »
We buy the ultimate clean up cards. Keep the all over the shop. And then we have a whole bunck of 4" wide putty knives forthe thicker inks.
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline Binkspot

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1108
Re: carding screens
« Reply #7 on: May 11, 2014, 04:14:40 PM »
Use these spreaders, maybe 100 or so.
http://www.webstaurantstore.com/11-1-2-nylon-sandwich-spreader-with-web-logo/280CR926WEB.html
And some 11" metal ones.

Also get the Ultimate Cleanup Cards, have piles of them around the shop. 1500 of them for $35 is well worth it to us.

Offline beanie357

  • !!!
  • Sr. Member
  • ****
  • Posts: 343
  • Patience begets quality
Re: carding screens
« Reply #8 on: May 11, 2014, 08:55:58 PM »
Spatulas for mixing, scoops for transfer out of 30's
Ultimate cards everywhere.

Offline Northland

  • Hero Member
  • *****
  • Posts: 622
Re: carding screens
« Reply #9 on: May 11, 2014, 09:24:46 PM »
What is your technique to removing ink efficiently and cleanly from the screen? I am using two cards and kind of scooping them together and scraping into the ink container.
I traded a credit card printer a couple blank shirts for a couple thousand gift card misprints.
I use them once and toss them into a bucket... every so often, I empty the bucket into foil pan and run it thru the dryer.
Then right into the trash with them.

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: carding screens
« Reply #10 on: May 12, 2014, 07:12:52 AM »
Flat metal cake decorator knifes, they look like ink knifes but were $1.00 each


Roger
RT screen designs
Www.rtscreendesigns. Com
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: carding screens
« Reply #11 on: May 12, 2014, 09:07:16 AM »

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: carding screens
« Reply #12 on: May 12, 2014, 09:26:55 AM »
We have access to huge amounts of scrap corrugated plastic for sign making. We cut them down and use the factory edge for ink scraping. Best thing is we have more than we ever need so use and trash.
"No man is an island"

Offline printguy

  • !!!
  • Verified/Junior
  • **
  • Posts: 85
Re: carding screens
« Reply #13 on: May 12, 2014, 09:57:58 AM »
We use PaperPlus - order 4 bundles of chipboard and they cut it into 3.5" x 4.5". Cost is 171.00 and yield is 9800 pieces which works out to .02 cents ea.

Chipboard product # is 1006432103085 and here's a link to a location finder: http://www.unisourceworldwide.com/Locations/Pages/all-locations.aspx

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: carding screens
« Reply #14 on: May 12, 2014, 10:44:15 AM »
I can't remember using anything but a 3" or 4" paint scraper with the sharp corners filed down...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't