I am using photoshop cs version 8...and T-Rip and an Epson 3000..sep is 300 resolution
I have 6 separations which have their own individual file...I am printing them out one at a time. I opened up the first one, the underbase which is halftoned.. it is in "grey scale" mode which is the mode all the seps are.
I got to File/Print with Preview...it brings up the "Print" window...I click on "Screen"...set LPI to 55....angle to 22.5....for shape I chose Ellipse..I click "ok"
Then, still on the "Print" window, I click "Page Set Up"...which brings the page set up window...I click "Printer"..I chose T-Rip...click "ok" on page set up.....
I click "Print" to send it to T-Rip.....then a window pops up saying "The image's resolution is higher than 2.5 times the halftone screen frequency. Print Anyway?"...i click "Proceed"
This brings up "Print" window....the T Rip is automatically chosen..I click OK...which then opens up T-Rip and the sep is now in T-Rip
Once in T-Rip i click on the printer button in t-rip and the sep starts printing......but it does NOT print in halftones nor is it opaque!
What about my steps am I doing wrong?? I do not know my way around Photoshop to well but I'm thinking what I am doing is correct....at least I thought it was....the sep is not printing out in halftones....its printing like it normally would if a rip was not involved...its printing the film like a regular printer would do it...I've already wasted 4 sheets and a lot of ink trying to figure this out.
