« previous next »
Pages: 1 [2]   Go Down

Author Topic: Discharge Whites Compared  (Read 3334 times)

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Discharge Whites Compared
« Reply #15 on: March 26, 2014, 10:51:48 AM »
Does anyone have any idea why the CCI would be so much more abrasive/caustic to the HVP emulsion?
Logged

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Discharge Whites Compared
« Reply #16 on: March 26, 2014, 02:49:59 PM »
It may have solvents in it....
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline CCI TECH

  • Newbie
  • *
  • Posts: 9
Re: Discharge Whites Compared
« Reply #17 on: March 26, 2014, 04:09:23 PM »
mimosatexas,

May I suggest you try a CCI emulsion for better results. Try TX-Discharge or WR-14, they will not break down with our ink. The info for each product is below.

WR-14 http://www.ccidom.com/products.php?product=WR%252d14-WATER-RESIST-EMULSION

TX-Discharge http://www.ccidom.com/products.php?product=TX%252dDISCHARGE-WATER-RESIST-EMULSION
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Discharge Whites Compared
« Reply #18 on: March 26, 2014, 04:48:56 PM »
I'll dote on the WR-14, love that stuff.

That said, the Aquasol had never let us down either.
Logged

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Discharge Whites Compared
« Reply #19 on: March 26, 2014, 05:12:33 PM »
I really do love the Aquasol, but I'm surprised that no other brand of ink eats away at it the way the CCI does.  I have even printed solvent and epoxy inks through it before in small runs without issue.  I'll order some WR14, I see that tossed around on the boards often enough to trust it.
Logged

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: Discharge Whites Compared
« Reply #20 on: March 26, 2014, 07:57:37 PM »
did some more testing today with WR14, and unless you have SUPER strong light source, FORGET IT!  You will be exposing til the cows come home to get it right.
Logged
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3208
Re: Discharge Whites Compared
« Reply #21 on: March 26, 2014, 09:13:47 PM »
mimo, try the tx-discharge. it's almost exactly like hpv, we used to use hvp for a while then switched over to tx because I could get it local.. been on it for about 2 years, it's awesome. same price point too, around 55/gal...
Logged
...keep doing what you're doing, you'll only get what you've got...

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Discharge Whites Compared
« Reply #22 on: March 26, 2014, 09:34:12 PM »
WR-14 8) I have had very good luck & not a lot of added time on burning for us, but that's just us. Using CCI base & PC. I have some Xenon Nova but I have not had the proper spot to give a shot, but that's another subject.

Murphy37
Logged

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: Discharge Whites Compared
« Reply #23 on: March 27, 2014, 09:13:56 AM »
What about  softness and washing?.
Logged

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Discharge Whites Compared
« Reply #24 on: March 27, 2014, 12:18:53 PM »
I properly cured the inks, so my wash test saw no appreciable difference in opacity change across brands.  I have only washed it once though at this point.  The CCI and Matsui
"ideal" mixes had a similar hand (essentially no hand).
Logged
Pages: 1 [2]   Go Up
« previous next »