Print Order Help

[Ryan]

I need some help with a print order for a job. Always seem to guess wrong so I thought I would try to get it right the first time.
1. FLASH
2. Light Green
3 Dk Green
4. Grey
5. Metalic Goldish color (not Metalic though)
6. Yellow
7. Red
8. White

HAve 3 flashes if need be as well.
thanks

[tpitman]

Are you missing an underbase?

[Ryan]

No just called it the FLASH. That's my base

Sent from my DROID RAZR HD using Tapatalk

[Ryan]

There us no white on that green fade/blob either. It just fades off

Sent from my DROID RAZR HD using Tapatalk

[screenxpress]

I assume halftone on the green that 'trails off", but still how do you do that without some underbase?  Did you do the seps? 

[Ryan]

There is an under base. Its the 1. I just called it FLASH

Sent from my DROID RAZR HD using Tapatalk

[screenxpress]

Oops, gotcha

On the sequence, I'd print them

1. FLASH
2. Yellow
3. Red
4. Light Green
5 Dk Green
6. Grey
7. Metalic Goldish color (not Metalic though) - not positive on this one
8. White

[Ryan]

126u is going to be the goldfish color

Sent from my DROID RAZR HD using Tapatalk

[screenxpress]

In that case, I think i would swap 6 with 7, but what do I know, lol.

[Inkworks]

I'd be flashing between the red and yellow prints for sure, the rest is a bit of a crap-shoot.

Base White
Flash
Yellow
Green
Dark Green
Grey
Gold
Flash
Red
Top White

[DannyGruninger]

I think its safe to say if ten people respond youll get ten different answers. If I were to print this in my shop it would print as follows. For us having a proper underbase on this would be important to control all those solid colors. We would run this with two flashes but if you wanted to add a third you could. Id think for that you must have a big auto to account for cool downs etc.

Underbase white
Flash
grey
dk green
light green
red
flash
gold
yellow
top white

If you had that extra 3rd flash stick it in front of the last top white. Like I said prob 10 different answers from 10 diff people but if we printed that with the above print order we could run it 60+ doz/hr easily.

[JackThrasher]

In my opinion I would Print it like this:

Base
FLASH
Yellow
Lt Green
Dk Green
FLASH
Grey
Gold
Red
FLASH
White

Might switch the Red and Third Flash. I would have to see the screens.